kulang bro ang 533.. dapat imong fsb is 800mhz. para maka POST na imong pc. see my 1st thread.. gikan to siya corsair support page.
it's one of the list.. it has 200mhz * 8 FSBP4 3.2 lng HT..
there's nothing wrong with ur procie
Intel Pentium 4 -3.20F GHz (EM64T) | 90nm
Intel Pentium 4 541 Prescott 3.2GHz 1MB L2 Cache LGA775 | 800 FSB | L2 1MB | E0,D0 stepping | 90nm
Intel Pentium 4 640 Prescott 3.2E GHz 2MB L2 Cache LGA775 | 800 FSB | L2:2MB | EM64T | HT | 90nm
Intel Pentium 4 640 Prescott 3.2E GHz 2MB L2 Cache LGA775 | 800 FSB | L2:2MB | EM64T | HT | 90nm |revB1
Intel Pentium 4 640 Prescott 3.2E GHz 2MB L2 Cache LGA775 | 800 FSB | L2:2MB | EM64T | HT | 90nm |revD0
and there's nothing wrong with ur mobo ( kagamit ko ani nga board and nakaayo napud ko ani nga mobo )
the problem is that the memory CL2 is just too tight to run in ur mobo
Corsair CMX1024-3200C2 : ddr400 ( 200MHz based x 2 | rising and falling ) CAS Level2
http://www.corsair.com/_datasheets/CMX1024-3200C2.pdf
i used to have 2 x 512MB CL2 BLACK ( sold to angelcruizin ) very stable sticks.runs very gud with my p5dv1-x
ur memory is an enthusiast class , while ur mobo is not.
Last edited by butitoy; 02-17-2010 at 01:57 PM.
^^ so, what's the problem bro ? tight ra siya mao.the problem is that the memory CL2 is just too tight to run in ur mobo
@ts : dili kaha bro, sa software side ni ang problem..like corrupted OS kay dili man lahos kay mag sige og restart lang.
then dili compatible ur mob and memory
ana gyud.buy new mobo or sell na lang ur enthusiast class sticks.
Similar Threads |
|