capacitor

[windox]

---

unsay gamit sa capacitor inag set-up ug sounds sa sakyanan? ug unsaon sad pag bagay bagay sa amplifier ug subwoofer para nindot ug labas? kinsa man naay knowledge bahin aning butanga...palihog ko share beh...

[more than just talk]

gamiti og 1 farad nga capacitor.

[tabutch]

gamiti ug eqx(equalizer crossover) para mka timpla ka sa sound,nya ang capacitor mao nay mu backup sa imo battery para kusog ang supply musulod sa imo amp para dli ma awp-awp,nya filter pud ni ang capacitor..

[windox]

thanks...pwede matubag ninyo uban pangutana nako...salamat

[tabutch]

ad2 tambay caltex recla,,pag susi did2 kay daghan man mag tambay did2 nga naay setup,pwede pud ka mangutana did2,

[bonito]

ang gamit sa capacitor para naay sound nga ppprrrrrrrrrrrrkkkkkkkkk ig on sa system!
ask boss edwin

[more than just talk]

bring your set-up at autoshop bay

[stonesour]

capacitor will serve as highpass, lowpass or bandpass filter.. google is your friend bro, ask for more info. :mrgreen:

[SlayeDDragon]

lagi lagi...kasabot nakos capacitor...kato isa ka pangutana nako...


unsaon sad pag bagay bagay sa amplifier ug subwoofer para nindot ug labas? kinsa man naay knowledge bahin aning butanga...palihog ko share beh...

[EZRA]

Capacitor: Mo store na siya ug power so pag once and mo hatag ug power sa imong amp ug kinahanglan (especially inig hapak sa imong subwoofer). It prevent your lights from dimming or your battery from draining. Actually ang power cap dili man gyud ang best remedy ani - ug pwede, upgrade kas imong alternator sa awto to prevent power shortages.

Anyhow - rule of thumb sa power cap. 1 Farad = 1000 watts of power from the amp.
----

As far as sa imong sub ug amp - make sure imong sub gibutang sa proper enclosure. Enclosure should be built according to the sub's specs (T/S parameters). The easiest way is to go with a sealed enclosure `cause not a lot of tuning is involved. Pero the best way is to go with a ported enclosure unya tuned port - port should be tuned under 30 hertz for SQ (sound quality), 30+hz for SPL (sound pressure level = pakusog). Pangita ug maayo nga box designer/builder para ma maximize nimo ang capability sa imong sub.
Take note: Subwoofers differs from one to the other .. they all act differently to the space they're given to work with... so dili ka maka gamit ug bisag unsa lang nga enclosure and expect your subwoofer to perform well.

Here is an Infinity Kappa Perfect VQ in a port enclosure:
[img width=500 height=374]http://memimage.cardomain.net/member_images/8/web/704000-704999/704592_56_full.jpg[/img]
This is an Infinity Kappa 12.1 in a sealed enclosure:
[img width=500 height=374]http://memimage.cardomain.net/member_images/8/web/704000-704999/704592_60_full.jpg[/img]

As for the amp .... set your crossover to maybe 80hz and under then set your gains accordingly. If dili ka kabalo mo set sa gains, mao ni ang basic procedure:
1- crank your head unit volume up to 3/4 max
2- turn your gains up til it the sound starts to distort a little bit
3- turn the gains down a notch from distortion level
---------

Hope these answers your questions.

If you wanna check out more pictures of my ride.. here's the link:
http://www.cardomain.com/ride/704592/1

Wala na ni siya nako gamita nga sakyanan... naa na ni sa Florida gi garahe.