why dili mu-andar ug ddr2 667 ako mobo? sa specs ky 533,667,800 man compatible

[whoopz]

---

Good day peeps,
I assembled a new pc with
amd x2 4000+
asrock nf7g-hd720p
- gf7050
- nforce 630a chipset (not sure sa number sa chipset)
and geil ddr2 667
Dili muandar at first, unya sa kadugay nako ug check, I found out nga pag ilis nako ug geil ddr2 800, muandar na cya. Ngano dili cya muandar ug 667? Ang specs unta 533, 667, 800 man ang compatible.

And to add more confusion, ang 667 gitaod nako sa lain computer, ni andar raman.

Pls. Help me understand what could be the reason for this. thanks.

[inkodell]

basin ang timings niya sir. try to check lang kuno.

[whoopz]

kung, timings ang reason, unsay xplanation bro? heheh.... di kayo ko swito ana.

[deford_cnca]

Bro, Try lang reset ang bios ani directly sa motherboard. Daghan possible naka trigger ani and we will focus on the motherboard. First, maybe this is not the first time nga nagamit ang MB and I think the default setting was already altered from the first used. Maybe at that time, it was set to 800 memory clock and it was save. Second, there is a possibility nga dili jud compatible ang memory sa MB. Third, try lang pud check mga jumper setting in the MB and look for clock settings if naa. Sometimes man gud, you have to manually set the clock setting directly to MB. I know this issues before since I was tech support from TTI Main back then.

[whoopz]

something confusing happened again. ni work na ang geil 667.



this is what happened step by step.
1. assembled the new pc with geil ddr2 667 - dili mu andar
2. replaced the geil ddr2 667 with a geil ddr2 800 - ni andar na
3. ako gisulyan ug balik ang geil ddr2 667 - ni andar na gyapon

maybe something like naka set cya to 800 then pagka andar na niya mudawat na cya 667. dont know lang, but im happy ok na.

[SHENGTON]

If your computer doesn't display anything because of the memory then you replace the memory and everything is fine. Then this is my advice. Some memory doesn't work at first but when you try to clean up the contacts of the memory then you'll see the result. You just have to clean the contacts of the RAM then everything will be ok.