compression

[tambay_loveit`]

---

ask lang ko pila dapat compression sa usa ka piston na bag o gi ilisan ug ring? thanks

[tambay_loveit`]

ok rana nga right after ilis kay 130 iya compression pagtest or dapat mas taas pa para kusgan?

[androeides]

asa ka nagpatest bro?

[vernie]

Consult the car manual or technical brochure, naa na sa specification sa sakyanan kung pila ang compression. Considering dili pa hilis imong cylinder walls, with a new piston ring nga sakto ug specification, you can expect a similar reading.

[jpn]

it will really depend on compression ratio of engine, cams installed and other factors....whats important when doing a compression test is to make sure all cylinders have approximately the same compression pressure.....I would believe a normal stock engine should reach at least 125psi, and not more thatn 200psi. As long as all cylinders are within 10psi difference then it was well overhauled, but if you get a difference of 20 or more psi then something was not done right...but it will still be ok, if the difference is more than 50psi...affected na jud and smoothness sa engine, ipa back job nana

[tambay_loveit`]

androeides. bro sa shop doul sa amo... after sa ila trabaho murag la lagi ko salig bro,ngayo ko mga 2nd opinion lagi.

jpn......... thnx sa info bro, 3 ka cylinders kay 135 den ang 1 ky 130. k rana bro?