HELP Router Configuration.

[wak_wak]

---

Guys i need help to configure my router.. D-Link ang gipalit sa ako brother.. I hope you could tell me what to do with this set up.. Thanks.. Nag search nako a forum, then nag try ko configure di man mo work.. Thank in advance..

Prolink 5200
||
||
||
D-Link DIR-300
||
||
||
PC and WIFI

[graveyard666]

unsay wala magwork? Ang PC di ka internet or the WIFI?

[wak_wak]

ang pag configure jud bro.. can u give me a guide?

thanx

[wak_wak]

wala pako kita ug guide for dlink..

pwd ba nako ni gamitun na process? lahi lang mi modem and router..

1) access the h9200 192.168.1.1 by default (username: admin passwordassword)
2) click admin tab and then click on autodetect
3) choose bridge&router and click enable.
4) click on the lan tab
5) enable dhcp server

now connect to the wrt54g

1) go to the wrt54g settings page also 192.168.1.1 by default (username: <blank> password: admin)
2) choose static IP with the following details:
IP - 192.168.1.5
Subnet - 255.255.255.0
Gateway - 192.168.1.1
static DNS 1 - 192.168.1.1
3) change local address to 192.168.0.1
4) disable DHCP server on the wrt54g
5) save settings.

wal ani work.. nyahaha..

[wak_wak]

2. Open your modem/router GUI by going to this address http://192.168.1.1

username: admin
password: password

3. Remove your old account by going to WAN settings and clicking the trash icon right next to your account username. (Skip this part if you don’t have one yet).

4. Create a new account in WAN configuration by applying the following settings:

VPI: 0
VCI: 35 (for Globe broadband)

5. Change the encapsulation to Bridge 1483

6. Check if the account is enabled

7. Go to DHCP page and disable DHCP

8. Go to Routing page and disable routing

9. Commit and Reboot

I’m thinking of a step 10 but I think that should do. Don’t forget to change your router IP to 192.168.2.1 (Linksys routers) then select PPOE as your type of connection. Provide your ISP username and password to start browsing. Good luck!

na try nako ni di pud mo work..

[r0mm3L]

ilisi daw ang dns to public dns

[wak_wak]

problem solve.. if your using vista sya na mu configure diretso..