"display driver has stopped responding and has fully recovered" II

[freelancetech]

---

@d.a.m.a.s.o.: Sir I've done several reformat of OS since this is new card.

@P0w3rM0v3: Hope its not sir. About the TEMPS here is my latest temps.

[freelancetech]

@Sempron: Yes sir ako unta suwayan pero guba iyang hsf! need to repair it pa. About PSU mao pud lage akong duda basin di niya makaya!

[Sempron Guy]

temps are pretty normal,....ang ako opinion ani either the psu, or the possible pud ang pci-e slot. Test it with another card first, if ok lang, that omits the possibility daot ang slot. Then test it with another psu.

[freelancetech]

@Sempron: Ok ako i try bro na imong suggestion.

Pero sir if guba akong PCIEX slot so far as I've known di jud na mo display or naay times di mag display or lose contact.

About the PSU are you sure kaya bajud ni niya sir? 500W? coz mag game ko never got a freeze or bsod issue anymore. But I will consider that one sir ako i change ug higher wattage 600W.

[Sempron Guy]

ayaw sa ichange diretso, I'm sure naay magpahulam diri ug psu sa istorya if duol sa imo loc,...ayaw sa pag-gasto basin dili diay psu. Also sa ako giingon, kaya ra sa psu pero if defective na siya then that's a different story. Unsa na kadugay since you got that error?

[werty]

*use only 1 stick of ram (mmmm may I know why should be putting 1 stick? it has been Memtest already w/o any erros)

just what i've said. to isolate things u need to run as minimal hardware as possible. during some of my OC i run mem @ tight timings as fast as possible and memtest or prime wont give you error(i only test for 2 hrs the longest) but when i run some 3d games or run flash-based videos or games mag problema ako PC with bsod and and videocard-related problems just like this your having in jst less than an hour, sometimes within mga 10mins or so.

[Inta]

i have experienced that with my 9500GT and i found out that's the symptoms of a dying video card. After replacement with a new VC it worked fine. Try a using a new video card and observe

[dootmars]

Iv experienced this before w/ my 9500GT. From what iv observed it happens when i push the card hard (having everything on high on heavy/not-so-heavy games..playing for 12hours or more) but it usually fixes itself after a restart. IMO, way labut ang uban hardware ani..could be just the card or d driver itself (as the error indicates).

[KH0UJ]

grabiha gud ani nga issue nimo bro ikaduha na man ni nimo nga VC mao ra man gihapon, layu-a sad sa inyo bro uy, andam ta ko mutabang pero medyo layo2x gyud inyo,

Test the (3.3V-5V-12V@load) voltages kuno bro while naka furmark test ka, tan-awa kung tag pila ang mga drop sa ilang mga voltage, multimeter gamita ha para sure gyud

[freelancetech]

Salamat kaayo sa inyong mabulhanong tambag.

@Sempron: After 2-3 days build while using ATI HD 5770.

@werty: Thanks sa advise ako na buhaton once mo balik.

@KHOUJ: Sir Salamat sa advise. Ako nana gi try ug FUMARK sir at first jud pag abot sa card pero mo stop ang FURMARK around 5 mins or less then mag black ang screen then mag error dayon tong mo gawas "display driver has stopped responding and has fully recovered"

What I did I used MSI Burner to increase the FAN SPEED to HIGH then I run the FUMARK w/o any crashing mga 15mins to pag test nako.

Pero sir intermittent kaayo so far so good after using the stock CD/DVD driver that comes w/ the card.

Btw, could you explain this well to me? coz not so familiar with this:

Test the (3.3V-5V-12V@load) voltages kuno bro while naka furmark test ka, tan-awa kung tag pila ang mga drop sa ilang mga voltage, multimeter gamita ha para sure gyud

Also what is multimiter? how to use it and what's the use? mao banang tester w/ wires? wala raba ko ana bro if mao na.