"display driver has stopped responding and has fully recovered"

[p26]

---

Naa q ingani nga issue. 8400gs (256mb) aq VC. aq na gupdate ang driver pro mao ghapon ang problema labaw na kung magtanaw q ug salida online or magduwa ug games. aq ginstallan ug fresh copy sa Vista from WinXP, pro mao ghapon. Ambot lang unsa problema aning VC.. pro pagsearch naku sa net, daghan jud nagreklamo sa 8400gs nga VC, same prob. naminimize lang ang problema after naku set to PCIe sa BIOS..mukalit2 lang ghapon ug tunga ang message pro dli na xa prehas sauna.

[Rainerius]

Cge ko ani sauna I used 3 kinds of cards to troubleshoot. Heavy graphics games on W7, Core i3 @ 4.1GHZ, 16GB DDR3, Strider 1200 Watts, MSI P55 GD80

1. EVGA GTX 260 SSC - Usually happens when it gets too hot, W7 minimizes the game and pops up the notification of a driver failure. Pag balik nimo sa game kay artifacts in your face. Opening the case/adding fans solved it.
2. 2 x EVGA GTX 260 SSC - Error galore, opening the case didn't solve it. I think the heat of the 2nd card is making the primary card overheat and fail. Aircon + Electric fan directly sa cards, naa gihapon pero dili na kaayo (around 3-4 hours straight gaming before it appears).
3. 2 x EVGA GTX 260 in SLI with new thermal pads and thermal paste, well ventilated case - No more problems
4. EVGA GTX 285 very slightly used murag brand new - no error at all

Ako conclusion is possibly a hardware problem, might be overheating VRAMs, GPU etc. Try to replace TIM and thermal pads (if applicable) and add more airflow sa case... I am not 100% sure, just contributing kay this is a fairly rampant problem.

[werty]

yup, bsin insufficient case ventilation ra ni..

[p26]

Open raman to aq case. tanang cover sa case aq na gitang2, ang upper portion lang sa case aq gipabilin..mu tunga man gihapon ang error message. Aq bitaw plano ani ipaatubang ang electric fan pra ma isolate jud ang problema.

Usually mu gawas ang error message kung mag buffer q ug video ug mag duwa ug games sama sa COD, L4D ug uban pa nga nindot nga duwa...

[Dondon]

Had a similar overheating issue before, p4 na PC, 9200SE pero ang error message was "atixsomething.dll (driver for ATI) has stopped working." so yeah basin kana pud.. Since nasuwayan naman nimo tanan, so dili na siguro na driver problem.

[gaspar_73]

run FURMARK...

[balipseyev]

Overheating problem man cguro ang cause ana...

[freelancetech]

Just to make things clear, I only have this issue using GTS450 "display driver has stopped responding and has fully recovered". Thats all and nothing else. It happen using the original CD driver and now it happen again even using the updated drivers from nvidia.

@balipseyev: I don't think its overheating issues..I have a good temps even before.

See the actual image prtsc using AIDA64:



They said I have to update/flash my bios coz it offers several updates and fix and improve stability and compatibility. I'd rather not as of now coz I'm afraid mapun-an nya ug problema hinoon. The bios I have here currently the 2nd one to the latest. Maybe I'll update later but now for now I have to resolve this issue first.

@gaspar: I did that already for 1 hour @ 80-82C w/o any issues.

Thanks all for you suggestion.

[johnwall]

what brand of GTS 450 did you buy bro?

[gaspar_73]

BIOS Update can fix software bugs and hardware incompatibility...do it carefully...ampo lang walay brownout.