PC won't boot, No POST, no Beeps

[coolnezz]

---

need a new PSU, 500W

[torade]

Bro, it's better kun naa ka kahulaman mga Peripherals para e testingan nimo kay sayang kaayo like kung mopalit ka og PSU pero ang guba is memory card diay 'to, scenario like this could happen nya imbes makatipid ka, mosamot noon imo gasto.

[luwid]

probably the most common culprit...power supply...try lain psu bro..

Goodluck

[cloud]

1. remove all cards,leaving only the CPU, MOBO and PSU, wala gyapon mo beep / post (lights on gyapon ang duha ka LED, tuyok gyapon ang cpu fan.)

most probable ani na scenario is PSU or MOBO kay wala naman memory supposedly mo BEEP nani. pero once ma elisan na nimo og known good PSU unya wala ghapon then MOBO na gyud since na clear naman nimo ang BIOS.

[junnix]

encounter somewhat kind of this problem what i do, i take out the cpu fan and processor then clean make sure free of dust den taod balik make sure sad na nakataod in proper way imong cpu fan usually mao sad na ang source. hope that helps...

[edddder]

salamat kaayo mga brod

i will try your suggestion tonight, huwam lang ko PSU,heheh

update lang nya ko result

[jiro]

confirmed.
My mobo
no ram = no boot/post/beep

just bought a ram today. everything booted fined.

[and1rew]

just try other suggestions, you might shorted the other parts, just make sure you discharge yourself by touching metal and grounded parts. PSU pud bro try pag replace

malibog mag troubleshoot ug pc noh ^^ minsan mouse lang pala sira kasi grounded xD

[manabu_kun]

@ts: musta na man imo pc bro? naulian na?,..

[tamusmos]

remove memory then turn on,listen for long beep if there is..i fur board is ok it should be beeping.
if there's still no beep, turn it off and remove the processor from ur board for a few seconds and put it back again..it usually happens when ur pc accidentally turns off due to a power failure.