"display driver has stopped responding and has fully recovered" II

[KH0UJ]

---

Salamat kaayo sa inyong mabulhanong tambag.

@Sempron: After 2-3 days build while using ATI HD 5770.

@werty: Thanks sa advise ako na buhaton once mo balik.

@KHOUJ: Sir Salamat sa advise. Ako nana gi try ug FUMARK sir at first jud pag abot sa card pero mo stop ang FURMARK around 5 mins or less then mag black ang screen then mag error dayon tong mo gawas "display driver has stopped responding and has fully recovered"

What I did I used MSI Burner to increase the FAN SPEED to HIGH then I run the FUMARK w/o any crashing mga 15mins to pag test nako.

Pero sir intermittent kaayo so far so good after using the stock CD/DVD driver that comes w/ the card.

Btw, could you explain this well to me? coz not so familiar with this:

Also what is multimiter? how to use it and what's the use? mao banang tester w/ wires? wala raba ko ana bro if mao na.

multimeter gud bro >>> CDR KING <<< kanang tag 120 ok ra na, i-test kung mu drop ba imong PSU while on load, basin ang imong PSU ang culprit, chassis ground ang black test lead nya pang tupluka ang likod sa connector (yellow, red, ug orange wires) kanang naa sa 24 pin socket nga gaconnect sa imong MOBO, tan-awon nato kung tag pila ang VDROP

[freelancetech]

@KHOUJ: Let see bro until next week if mo balik pajud ang warning error message. Thanks

Update: I made some 30mins testing each of FUMARK and Video card stability tester w/o any errors and issues.

[werty]

d lagi problema ang imo videocard or imo driver ana since again and again sige na ka stress test even replaced vc thrice pero same problem gihapon imo nasinati. your only stressing only one hardware at a time.

if every settings you got are at default or at safe settings, im looking at a motherboard or a psu problem here.

[freelancetech]

@werty: Yes sir mao pud akong gi isolate ron...

Kani akong mobo sir gikan ni sa ASUS taiwan daug nako mao ako ni gi use jud. These high-end mobo's kuli ra kaayo maguba siya sir not unless ga OC ka or whatsoever.

IF sa PSU ang fault I will try to replace it nalang into higher wattage like 600W SS!

[werty]

Kani akong mobo sir gikan ni sa ASUS taiwan daug nako mao ako ni gi use jud. These high-end mobo's kuli ra kaayo maguba siya sir not unless ga OC ka or whatsoever.

thats why we need to isolate. it could be a motherboard problem or just probably settings lang or whatsoever causing incompatibility or whatsoever causing the video-related problems.... these things does happen ma low-end or ma high-end imo items, all we can do is to isolate as much as possible and find what causes the problem.

[freelancetech]

@werty: Yup naa pud kay point. About pud sa setting sa bios I leave as is all default ako rang gi setup was the boot options after following your instructions nga i clear ang CMOS through the mobo jumpers. Ang prob mangud diri sir kay lisod ma re create ang issue mao hasol kay di ta kabalo when mo gawas ma buang tag hinowat. Anyways I will update it to you all since the Mobo and PSU nalang dapat i isolate.

Thanks...

[fineupgrades]

taken from other forums..

The issue is a TDR fault. The same thing occurs with nvlddmkm.sys or whatever the nvidia equivalent is. you cannot understand atikmdag without understanding Timeout detection and recovery, a solely vista and windows 7 feature. Read up on that directly from microsoft and you will get a lot of answers to help your website.

It can be caused by anything between the power cord and the screen.. but generally (if it is working properly) indicates a hardware fault with the GPU. If you change the amount of RAM or cpu cores in msconfig you are crippling your system. Never use those as final solutions. If a second ram stick is causign the problems you have a setup issue beyond the GPU.

Most of the software causes to this are corrected in the latest drivers and windows 7. If the issue still happens in 9.4, and specifically windows 7 take a good hard look at your hardware.

ATIKMDAG stopped responding has recovered - Graphics-Cards - Graphic-Displays

[fineupgrades]

another one..

Stickywulf developed this method that you should use each time you update your driver. It also helps you to force Vista from automatically installing a krap driver in case you forget to check frequently on your own:

1. Control Panel=>Windows Update=>Change Settings=>"Download updates but let me choose whether to install them".
2. Download the latest driver from the nvidia website. http://www.nvidia.co...ers/drivers.asp
3. Go to Device Manager, select your display adaptor, and uninstall it, choose to also delete drivers when prompted.
4. Reboot computer into safe mode by pressing f8 when the computer boots, when prompted to install new display driver choose "never install a driver for this device"
5. Navigate to c:\windows\system32\drivers\ and rename the file nvlddmkm.sys to nvlddmkm_old.sys. Take note of the date of this file
6. Navigate to c:\windows\system32 and rename any other file of the same date as nvlddmkm.sys which begins with the letters 'nv'
**ADDED FOR CLARITY***
For examples:
nvcplui.exe become nvcplui_old.exe
nvd3dumx.dll becomes nvd3dumx_old.exe
etc..etc..etc..Repeat for all files with the same date as the file you found in step 5, they begin with the letters 'nv'
If it is too tedious to rename all the files, you can simply delete them, or move them to a different folder.
*********************
6a. For 64bit Vista, repeat step 6 in c:\windows\sysWOW64
7. Reboot to normal Windows, if prompted again to install a driver choose "never install a driver for this device.
8. Install the driver which you downloaded from the nvidia website.

Display driver stopped responding and has recoverd - NVIDIA Forums

[freelancetech]

@fineupgrades: Sir I don't know if this is something to do w/ my silverstone PSU but it just 500W and I doubt if kaya sa akong system as posted the specs of my PC from previous page.

[isaacrobot]

naa baya ko ani nga poblema sa akong setup, gtx 560ti nya 850w ako psu, pero dli permanente, like in 2 or 3 weeks time mo kalit in ani. kelangan nako ibton ang 2 ka 6pin connector sa gpu nya re insert daun ma ulian nasad, nya after 2 or 3 weeks same scenario nasad, kapoi kaau isolate asa poblema kai dugay kaau mo gawas ang poblema haha, naa lang koi feeling nga pcie problem ni,