Processor Temperature Problem

[spongbhadz42]

---

imposible man pud walay thermal paste sir oi nga naa mana dala sa HSF niya...basin wala lang na natarong ang HSF ana niya sir...try to follow ilang g.pang sulti sir kay sus pagka inita jd dli jd na mg.dugay imong CPU...grabiha 90c!!!sukad2 karon pako ka kita ana dri sa istorya...

ako jd CPU naabot sa max temp niya...gmonitor jd nako sa bios abot 90c+ hantod ni.auto shutdown na lng...naa pa to thermal paste and ang problem lng kay la nako nabantayan luag pagkabutang sa ako HSF...aheheh krn dagan og 40c+ ako cpu...

[vipvip68]

in-ana jud iya temp bai kung way thermal paste?

YES!!!... Butangi na na' thermal paste oi.

[jrtomarz]

like sa ako previous ani imo thread check na lng sa BIOS nimo ang temp sa imo CPU, kay naa 3rd applications dli accurate sa temp ila ihatag... kng sa BIOS gani mao jd ang temp niya better ireduce na xa pra ang lifespan sa imo procie dli dali mamatay...kay kng cge na grabeh kainit dali ra madaot imo procie masyang lng...kng tig render ka kaon mn jd imo procie ana moinit pd jd na xa au...pro akong advise na lng kng nahan ka dugay madaot imo procie butangi na lng na thermal paste and tarunga og butang ang HSF...lisod na og masunog pa imo whole system unit tungod cge init imo mga components... ^^

pasabot wala ni.shutdown imo pc ana nga temp...wala pa na xa ni.abot sa peak ang temp sa imo CPU... pero madmge unya lng kng cge ingon ana kataas ang temp...

thanks bai, ako nani butangan ug thermal paste nya ako obserbahan,, ako pud na suwayan explore ang bios bahin anang temps.

[poldopunk]

hello TS,

can you please use hardware monitor para naa ta'y approximation pila ka watts imong TDP. it's under the category 'Powers'. make sure you're running some sort of a stress test.



datasheet for i5-700 series states that maximum Tcase for full 95-watt operation sa TDP is at 72.7 degree celsius.

Spoiler! 

it's assumed i5-760 has a Tjunction 99 celsius and if you're running 97 ~ 98c, this is not possible. note the following from the datasheet:

Spoiler! 

this means that at your temperature, the #PROCHOT signal should have already activated and has started lowering your frequency and voltage but since it didn't, we can assume that the sensor readings are not working correctly. they were never meant to report accurate temperature in the first place but designed to protect the processor.

here's my recommendation before you start re-applying the thermal paste. download RealTemp and do a sensor test.

Real Temp - CPU temperature monitoring

[EarlZ]

I believe his processor hit thermal throttle at 97c but CoreTemp may not be accurate enough to show that its really been throttled, Thermal shutdown happens at 105c IIRC.

I've also tried activating the thermal throttle on my own processor when I got it, it went off at 98c. RealTemp got the Prochot signal right away but other tools still see it as a full 3.5Ghz while RT sees it at 1600Mhz.

I havent really read the entire thread yet, but Im guessing this is the classic no thermal paste OR heatsink mounting issue which can be fixed in 10mins

[poldopunk]

i don't think it's throttled, check the clockspeed at those temperatures, 2.9 GHz, naka turbo pa.

[balipseyev]

Pde naman magluto ug itlog anang imung procie bro...

[EarlZ]

i don't think it's throttled, check the clockspeed at those temperatures, 2.9 GHz, naka turbo pa.

Mine still shows 3.5Ghz with all tools aside from RealTemp 3.67 so I would blame it on detection error OR his board has an option to disable thermal protection which is an odd ball feature to have.

[poldopunk]

@EarlZ: point taken.

@TS: try another utility, bai. CPU-Z perhaps side-by-side with coretemp, realtemp and hardware monitor while stressing the cores. accurate man gud sa akoa ang reporting inig assert sa prochot. munaug dayun ang multiplier ug voltage inig pula sa realtemp.

edit: @ EarlZ, prochot cannot be disabled. this is built right into the hardware, wala'y software management (BIOS).

[engwan]

Just like mr nicejohn said, impossible nga walay thermal paste kung brand new ni cya pag palit.
AFAIK naa naman daan sa stock HSF, nakapilit.

Wa lang cguro natarong og taud, or sayup ang sensor/software.