Need help: No Post or No Beeps after cleaning my PC

[firebasefury]

---

Maayong adlaw guys. Ask unta ko help ninyo if naa lang mo idea.

Last weekend, ako gi limpyohan akong CPU (as in tanggal jud tanan from the case) kay abog na. prior ko nag limpyo everything is working fine.

After nako na limpyohan, ako gi balik na taod tanan and noticed na walay post or beeps akong PC. So I did some troubleshooting ako gi anam2x pero bisan pa i-remove nako ang RAM or VC wala ra man gihapon post errors or beeps. Mo power ON ra siya kaso wala na ma buhat lain. Any ideas unsa pa ako i-check?

mao ni ang specs:
Phenom X6 3.0ghz with Noctua NHD14 cooler
16gb g.skill sniper ram
MSI 890 FXA-GD70 mobo
Silverstone strider 850 watts PSU 80+ gold
XFX 6970 VC 2GB
Sapphire 6970 VC 2GB

Hinaot naay makatabang nako diri. Salamat daan.

[hellopussy]

basin wala nimo ma taud ang speaker sir,



or tan'awa sa MoBo ang iyang pin, naay name naka indicate ana. red/black kasagaran color ana if sa front panel imong speaker

[criscel]

hasola raba ani imong rig kay dagko ug cooler and vc..

anyway, try to install first the basic components (im not familiar with beeps anyway)
processor
ram (if you have 2pcs, try one at each time)
mobo
and PSU
---Power-up

> if no response, try the other ram module if you have two available
> try extra psu if available
> if imo gitang2x ang processor paglimpyo, try remove and re-install again (basin wala natarong ug taod)

- if all else fail posible naa sa mobo ang problem

[firebasefury]

thanks sa suggestions bro
tried it bro. 0, 1, 2, 3, 4 rams installed no response gihapon
tried also removing VC wa gihapon signal
tried also removing the proc and re-installed wala gihapon


di man lisod pag troubleshoot ra bro kay ako man gipagawas sa casing.


nag duda pud ko ang mobo naay problema pero naglibog lang ko kay prior ko nag limpyo working man siya. nag duwa pako then after an hour diha pa ko nag limpyo.
unfortunately wala koy spare PSU

[criscel]

so meaning need paka mutry ug laing PSU, bisan generic lng ok ra pangtesting lng..

> if sa mobo ang problem, basin naapektohan ug static electricity ang board
sensitive biya na ang board.

ordinary paint brush imo gigamit pagLimpyo?


-------
try ka ug lain PSU - if mao gihapon
last option, try ka ug lain board....

[firebasefury]

Actually wala nako gi brushan ang board bro. Just now lang nako gi brushan wala nakoy lain options.

Oo ordinary paint brush lang ako gamit since case ra man gud to ako gi brushan at first.

I think PSU is ok ra bro maka power up ra siya tanan devices so far. Ako duda is board ang problem. hahay hasola naman jud ani.

[wylliexhan]

^ The best way for you to check if the mobo is dead or not is by powering ON the PC without the RAM, if mobo is alive it will give you a long beep (means RAM is not installed)...

If you power ON the PC without the RAM and then if there's no beep code, means it could either be the MOBO is dead. .

[firebasefury]

Oo bai na try na nako, as the description in the first post. no beep no nothing but it powers on lang.

Basin lang naa pa similar experience diri na ma-recover ra by other troubleshooting procedures.

- - - Updated - - -

basin wala nimo ma taud ang speaker sir,



or tan'awa sa MoBo ang iyang pin, naay name naka indicate ana. red/black kasagaran color ana if sa front panel imong speaker

naa ang speaker bro naka kabit ra siya.

[wylliexhan]

^ Try removing the CMOS battery bro to reset the BIOS settings, try pd og mounting your NHD14 without the brackets and locks, what i mean is just place it top on your CPU (no force applied).

[firebasefury]

^^ Tried it also bro wala gihapon after first encounter na walay response pag human ug limpyo ako na siya gipagawas sa case and tried removing the battery and resetting the CMOS battery.

Actually mao ni ron hitsura niya bro.