[HELP]How to port forward PROLiNK H5001NS ADSL Wireless Modem for PS4?

[theblackfox]

---

Alam ko na may post dito para mag port forward ng prolink h5001ns kaso paano gagawain ito sa PS4? alam ko dapat open ang mga ports 80, 443, 1935, 3478-3480, 3478-3479 at hindi ko sure kung gumagana ang pag port forward nito kasi walang tutorial para dito at walang ako alam sa networking. Gusto ko ang tulong nyo po, pagod na ako sa NAT type 3.

[theblackfox]

meron gan tulong please?

[dab_s_bad]

meron gan tulong please?

beg for mercy first! ^_^

[dab_s_bad]

for the love of...
just tried accessing admin user on my prolink h5001n and I don't see the darn feature
sorry bro, I seem can't help for the moment.

[theblackfox]

for the love of...
just tried accessing admin user on my prolink h5001n and I don't see the darn feature
sorry bro, I seem can't help for the moment.

all I know is the virtual servers in routing configuration is one of the steps to port forward it.

[dab_s_bad]

all I know is the virtual servers in routing configuration is one of the steps to port forward it.

no gets

anyways, I find the modem/router (h5001n) a piece of CRAP!, I hope your h5001ns does have port forwarding feature, if so, then its easy.

if you don't have it also, get a modem that has port forwarding.

[theblackfox]

I think it does because of this thread https://www.istorya.net/forums/networ...ess-modem.html but it helped me only little.

[dab_s_bad]

I think it does because of this thread https://www.istorya.net/forums/networ...ess-modem.html but it helped me only little.

I know now what you mean ^_^
seen the things then.

if du-ol palang ta bro kay tabang ko nimo ani


if kaya ra nimo:
do this on every port you mentioned "80, 443, 1935, 3478-3480, 3478-3479"

PORTFORWARD BOTH TCP AND UDP! [example: port 80 with tcp and port 80 again with udp]

go to virtual server
- service type can be edited to whatever you like [I believe it does not matter as this is just labels I think]
- protocol [first example is tcp (tcp first or udp, then add the same for every port)]
- wan setting [should be interface (default)]
- wan interface [mine was with pppoe1 but you can choose the 'any']
- wan port [first example is 80]
- lan open port [same 80]
- lan IP address [ip address sa imo ps4] (I HIGHLY SUGGEST PUT A STATIC DYNAMIC IP ON YOUR PS4!)
- click apply changes, do it again and this time do it almost the same with port 80 and just change protocol to UDP!

repeat until all ports are placed in 'the' virtual server

note: Im not sure if mudawat ba ang router nimo ug range like 3478-3480, I suggest to put individual port range like 3478, 3479, 3480.

syaro..., dagan na gyud na imo games ani ^_^

[theblackfox]

I know now what you mean ^_^
seen the things then.

if du-ol palang ta bro kay tabang ko nimo ani


if kaya ra nimo:
do this on every port you mentioned "80, 443, 1935, 3478-3480, 3478-3479"

PORTFORWARD BOTH TCP AND UDP! [example: port 80 with tcp and port 80 again with udp]

go to virtual server
- service type can be edited to whatever you like [I believe it does not matter as this is just labels I think]
- protocol [first example is tcp (tcp first or udp, then add the same for every port)]
- wan setting [should be interface (default)]
- wan interface [mine was with pppoe1 but you can choose the 'any']
- wan port [first example is 80]
- lan open port [same 80]
- lan IP address [ip address sa imo ps4] (I HIGHLY SUGGEST PUT A STATIC DYNAMIC IP ON YOUR PS4!)
- click apply changes, do it again and this time do it almost the same with port 80 and just change protocol to UDP!

repeat until all ports are placed in 'the' virtual server

note: Im not sure if mudawat ba ang router nimo ug range like 3478-3480, I suggest to put individual port range like 3478, 3479, 3480.

syaro..., dagan na gyud na imo games ani ^_^

how about static IP address?

[dab_s_bad]

how about static IP address?

ahhh, spoon feed galore ^_^

this is how I do it on my h5001n for static dynamci ip [i hope that h5001ns is the same:
go to advanced, dhcp settings, then mac based assignment.

for hostname [you can name this to PS4]
for host mac address [mac address of your PS4]
for assigned ip address [this is the static ip address, this will not change]
click assign ip