Custom Liquid Cooling setup? Please help :)

[wylliexhan]

---

Hi guys!

Mangayo lang ko sa inyong tambag about setting up a custom liquid cooling. i don't have experience setting up LCS since i have only tried using air cooling and closed loop cooling. One of the reason i want to setup liquid cooling is that i am overclocking my CPU and getting hot temperatures and not satisfied with corsair h100i overclocked to 4.2ghz 1.2V but i am getting around 80-85C 100% load which is really bad. i am aiming for high freq. speed w/ low temps. i am using asus vi gene and i7-4770k. i am looking for a liquid cooling kit my budget is around 12k-15k, not included the gpu cooling since my first target is cpu cooling, then later the gpu.

1. Asa ta makapalit og liquid cooling kit ari sa cebu? I haven't seen one nga namaligya dri like G.I, PQB, Nutech, etc. What brands do you recommend? Ayaw lang ng Larkooler.
2. I'm looking for a kit nga maigo sa akong corsair 350d, what i mean is ang radiator 240mm ang iyang thickness dli masabod sa akong mobo, sa akong corsair h100i which is 27mm hapit na sya masabod sa mobo.
3. I am only planning to use 1 240mm radiator, 1 pump & reservoir for both CPU and GPU cooling. I emailed XSPC and they recommended it's okay. Is this possible? What are your recommendations? I'm not cooling my GPU as of the moment, but in the future.
4. If you can't find a liquid cooling kit for my needs. What radiator, cpu block, pump & reservoir, tubes, coolant, etc. that fits to my needs? What are your recommendations? Where can I buy these items?

Thank you istoryans. Your suggestions and recommendations will be welcome. I am asking for ur help labi na sa mga enthusiast mga suhito aning mga butanga

[LadYKilleR8520]

giro. ilis nlang ug Devil's Canyon.. ahahah

[LordZhen]

Hi guys!

Mangayo lang ko sa inyong tambag about setting up a custom liquid cooling. i don't have experience setting up LCS since i have only tried using air cooling and closed loop cooling. One of the reason i want to setup liquid cooling is that i am overclocking my CPU and getting hot temperatures and not satisfied with corsair h100i overclocked to 4.2ghz 1.2V but i am getting around 80-85C 100% load which is really bad. i am aiming for high freq. speed w/ low temps. i am using asus vi gene and i7-4770k. i am looking for a liquid cooling kit my budget is around 12k-15k, not included the gpu cooling since my first target is cpu cooling, then later the gpu.

1. Asa ta makapalit og liquid cooling kit ari sa cebu? I haven't seen one nga namaligya dri like G.I, PQB, Nutech, etc. What brands do you recommend? Ayaw lang ng Larkooler.
2. I'm looking for a kit nga maigo sa akong corsair 350d, what i mean is ang radiator 240mm ang iyang thickness dli masabod sa akong mobo, sa akong corsair h100i which is 27mm hapit na sya masabod sa mobo.
3. I am only planning to use 1 240mm radiator, 1 pump & reservoir for both CPU and GPU cooling. I emailed XSPC and they recommended it's okay. Is this possible? What are your recommendations? I'm not cooling my GPU as of the moment, but in the future.
4. If you can't find a liquid cooling kit for my needs. What radiator, cpu block, pump & reservoir, tubes, coolant, etc. that fits to my needs? What are your recommendations? Where can I buy these items?

Thank you istoryans. Your suggestions and recommendations will be welcome. I am asking for ur help labi na sa mga enthusiast mga suhito aning mga butanga

Wla pa d.i ka kita sa bag.o na larkooler hehe, they now support g 1/4 thread and you can upgrade the fittings and tubes to 3/8 5/8. Same na sila sa EK kits na 3/8 1/2 ang gamit na tube and compression fittings. Downside lang is

Ek kits (240 rad kit ) 14k ++
Ek Kits (360 rad kit ) 16k ++
Larkooler KU13 Extreme 9,999

(order basis ni)

Basic Kits includes (for EK)

Cpu block
dcp 2.2 pump
Radiator
120mm fan
3/8 1/2 tube
3/8 1/2 compression fittins
Res
blue uv coolant

Pde rapud dili ka mo palit ug kit:

Buy an EK block (if nahan jud ka sa ek)
Buy an EK dcp 2.2 pump (mao ni basic pump sa ek, mas mahal ang D5 vario and palitanan pa pud ug ek pump top if you opt for this)
3/8 5/8 oem tubes
3/8 5/8 oem fittings (8 pcs. Kay every kit has 8 pcs Why? Evey water cooling component has 2 slots. Inlet and outlet. Namely Cpu Block, Radiator, Res, Pump so 2 of each equals to


Ill post pud later comparison sa block thickness (cpu block) sa EK ug sa larkooler (new larkooler) dli katong gamay kaayog tube

All watercooling components pde ra mapalit sa shop

Terabyte Modz Technologies
www.facebook.com/TeraBytezModz
Computer Supply |Parts | Accessories

[j_rotten]

pm lng pinoyrigz or nonoyxp here or sa fb boss, naa cla individual parts available.
naa sa may junquera ila shop atbang sa cosmopolitan

[wylliexhan]

@LordZhen Thank you sa imong input boss naa koy nakit-an nga EK-KIT H3O 240 HFX Watercooling Kit boss pero ang iyang Radiator Thickness dako man so masangit sa akong motherboard, mostly sa akong nakit-an nga Watercooling Kit puro dako ang Radiator so naglibog ko nga KIT ba or mag custom nlng jd ko. Mas maayo ba nga mag Custom nlng ko boss rather than buying the KIT?

I like the EK waterblocks boss kay acrylic sya makita ang Color sa FLUID jd. .but naa koy naganahan katong XSPC CPU Block kay naa siyay LED light which i really like it kay hayag kaayo, okay ra ba ni siya boss? 3/8 5/8 ba iyang fittings ani masigo ra? Gusto pod ko og katong BAGA nga tubes dli same sa larkooler nga nipis. .mao bana sya ang 3/8 5/8 boss? hehe. .

Ang dli lang nako ganahan sa Larkooler boss kay iyang design, batian ko og nawng sa iyang CPU Block, niwang then ugly kaayo hehe. .so for now, pass lng sa ko sa larkooler kay if mo palit ko magmahay nya ko in the future maka huna2 na pod og upgrade, i need my items to be worth it arun walay mahay hehe.

And about sa Radiator 240mm boss okay ra jd kaayo nako bisag unsa nga radiator basta dli lang gyud masabod sa akong motherboard kay akong casing kay corsair 350d man and akong corsair h100i w/c is 27mm iyang thickness hapit2 na jd masabod hehe. .

And akong ganahan na reservoir boss kanang sakto ra ang masulod, dli daghan og dli pod gamay hehe. .mas ganahan ko atong reservoir w/ pump pero okay ra pod separate reservoir and pump. .dli lang ko atong 5.25" bay nga res/pump hehe. .kay gamay2 jd ni akong casing so dli jd masulod sa front bay kay naa pod koy fan controller

Unsa imong ma recommend ani boss? hehe .

[wylliexhan]

Boss unsay nakalahi aning 3/8 5/8 and 3/8 1/2 nga Fittings ang Tubings? Perehas ra ba ni cla? Not so sure if unsa ako paliton nga fittings just in case nana koy cpu block, rad, pump, and res, basin lahi2 ang size sa ilang fittings nga needed? like XSPC and EK? hehe.

[LordZhen]

Boss unsay nakalahi aning 3/8 5/8 and 3/8 1/2 nga Fittings ang Tubings? Perehas ra ba ni cla? Not so sure if unsa ako paliton nga fittings just in case nana koy cpu block, rad, pump, and res, basin lahi2 ang size sa ilang fittings nga needed? like XSPC and EK? hehe.

EK, Swiftech and larkooler uses the same G 1/4 Thread fittings. Ang kaning sizes 3/8 5/8 and 3/8 1/2 is the size of the tubes (outer diameter) and (inner Diameter) kaning 3/8 5/8 is baga ug OD while the 3/8 1/2 is Gamay ug OD

And as mentioned nako a while ago a simple Actual comparison of the EK cpu block and EK larkooler block with their 3/8 1/2 compression fittings.



Side by side thickness, while EK has a Clear or Accetal top, the larkooler has full aluminum block cover on top



and these are the 3/8 1/2 compression fittings of EK and larkooler



Individual Actual look of the EK block and Larkooler Block





- - - Updated - - -

@LordZhen Thank you sa imong input boss naa koy nakit-an nga EK-KIT H3O 240 HFX Watercooling Kit boss pero ang iyang Radiator Thickness dako man so masangit sa akong motherboard, mostly sa akong nakit-an nga Watercooling Kit puro dako ang Radiator so naglibog ko nga KIT ba or mag custom nlng jd ko. Mas maayo ba nga mag Custom nlng ko boss rather than buying the KIT?

I like the EK waterblocks boss kay acrylic sya makita ang Color sa FLUID jd. .but naa koy naganahan katong XSPC CPU Block kay naa siyay LED light which i really like it kay hayag kaayo, okay ra ba ni siya boss? 3/8 5/8 ba iyang fittings ani masigo ra? Gusto pod ko og katong BAGA nga tubes dli same sa larkooler nga nipis. .mao bana sya ang 3/8 5/8 boss? hehe. .

Ang dli lang nako ganahan sa Larkooler boss kay iyang design, batian ko og nawng sa iyang CPU Block, niwang then ugly kaayo hehe. .so for now, pass lng sa ko sa larkooler kay if mo palit ko magmahay nya ko in the future maka huna2 na pod og upgrade, i need my items to be worth it arun walay mahay hehe.

And about sa Radiator 240mm boss okay ra jd kaayo nako bisag unsa nga radiator basta dli lang gyud masabod sa akong motherboard kay akong casing kay corsair 350d man and akong corsair h100i w/c is 27mm iyang thickness hapit2 na jd masabod hehe. .

And akong ganahan na reservoir boss kanang sakto ra ang masulod, dli daghan og dli pod gamay hehe. .mas ganahan ko atong reservoir w/ pump pero okay ra pod separate reservoir and pump. .dli lang ko atong 5.25" bay nga res/pump hehe. .kay gamay2 jd ni akong casing so dli jd masulod sa front bay kay naa pod koy fan controller

Unsa imong ma recommend ani boss? hehe .

Aesthetics pud d.i imu gi apas, imu pud unta to gi mention para makasabot ko hahahaha. Anyways ang clear na EK block pde nimu mabutangan ug LED light mod like what i did on my CPU Block