Where to buy generic server in cebu or Cheapest server supplier here in cebu

[jack_cool]

---

Guys need your input I need to buy new server pwede ra generic since budget entawn ang office or pwede sad known brand basin mosulod sa budget any idea where to buy here in cebu thanks in advance guyz

[POPiO]

PM nya.. ma-help ka nya sa mga parts.. @siopao1984

elaborate lang imu need jd, unsa imu gamitan, imu budget .. ug tanan2x .. pra mas matabangan ka namo..

u can ask @butitoy also ..
@lloyd_joy kani sad pde sad ka ask ani..

[butitoy]

budget bro?

and usage sa server?

DCHP | FileServer - Printer | Web Server | Mail Server?

[jack_cool]

Use mga sir is For newly bought accounting system so this will serve as a server and a database for the accounting system
mao to ni ako paliton kaso dugay ang delivery 30 to 60 days giapas nako sa schedule PRIMA BP1304BB Server System
then naa sad unta refurbish kaso DDR2 ba IBM inig upgrade nako into 16gb na memory then 1tb hdd 4 pcs for raid 10 setup my GOD 200K+ dayon ang total mag brandnew na lng ko then kaso ang budget around 100k ra

[lloyd_joy]

^ bro jack_cool,

ana gyud nang branded server bro, sakit gyud ug presyo labi na ang latest HW technology ang gipang gamit... check sa B&S, naa'y mga servers na baligya did2... basin acceptable nimo ang configuration sa units...

here's the links... contact sa seller basin naa sya'y daghan pa na server configuration na mapilian..

https://www.istorya.net/forums/comput...hp-server.html

https://www.istorya.net/forums/comput...bm-server.html



or you can DIY one... kani, maka barato gyud ka ani... use a server board (pili-a ang ATX form factor para daghan chassis ang mapili-an) and ECC mem modules... then for the HDDs, you can choose for SAS or SATA configuration...

[jack_cool]

^ bro jack_cool,

ana gyud nang branded server bro, sakit gyud ug presyo labi na ang latest HW technology ang gipang gamit... check sa B&S, naa'y mga servers na baligya did2... basin acceptable nimo ang configuration sa units...

here's the links... contact sa seller basin naa sya'y daghan pa na server configuration na mapilian..

https://www.istorya.net/forums/comput...hp-server.html

https://www.istorya.net/forums/comput...bm-server.html



or you can DIY one... kani, maka barato gyud ka ani... use a server board (pili-a ang ATX form factor para daghan chassis ang mapili-an) and ECC mem modules... then for the HDDs, you can choose for SAS or SATA configuration...

thanks sa idea yup ako na gi try sa buy and sell section mao to ako problem upon upgrading sa ako gusto na mahal man ang memory na DDR2 for server type inig upgrade nako duol ra ug price sa brandnew maypa brandnew na lng ko tapos ang problema kay 30 to 60 days man ang delivery sa brandnew dli na kaya sa schedule so mag generic server na lng cguro ko na naa ra daghan sa market can you suggest me unsa na specs or build for generic
like unsa:
1.Motherboard brand and model
2.Processor ok ra nako ang quadcore adto ba ko sa i7 or sa xeon na processor
3.brand and model sa memory
4.brand and model sa raid controller that I could setup to raid 10
5.power supply
6.hdd type i could go for a SAS or pwede sad sata
7.Casing (for now dli kaayo problem because I have extra tower and rackmount type casing)

for now kana pa ako nahuna-hunaan na specs kung naa mo ika add much better karon na week jud nako pliton unta ang mga parts if I go for a generic type server.

Thanks ninyo tanan mga master this is my first time man gud na ako ang gitahasan pangita sa server hehehe before kay ready na ang server pag setup ra ako problema karon pati source out sa server and build ako na (I.T jud diay ta ani - Imo tanan) hehehehe

[lloyd_joy]

^ try contact ni crx sa wired systems... basin maka tabang sya sa imohang need for the server DIY... answer ko gamay ha... short lang kay padung pa ko's office after ani...


1.Motherboard brand and model
> naa daghan sa Intel... from the old LGA CPUs to the latest one. the mobos are really build for server use... pwede ka mag single or dual socket CPUs... for a start, better use the LGA 1155 or 1150 Xeon platform. affordable man kaayo ni sila. but single physical CPU socket lang hinoon...

2.Processor ok ra nako ang quadcore adto ba ko sa i7 or sa xeon na processor
> use intel's Xeon line... Xeon E3xx series (V1 or V2 on LGA 1155 or V3 for LGA 1150) if mag LGA 1155 platform...

3.brand and model sa memory...
> naa daghan aning ECC... depende sa mobo speed... ok ra gyud ang DDR2 ECC mem for an application server gani...
> for the ECC mem brand na dali ra mapalit dha, Kingston man siguro... though, not sure ani...

4.brand and model sa raid controller that I could setup to raid 10
> not sure ko unsa'y nice na 3rd party raid controller...

5.power supply
> depende sa form factor sa chassis... better, use the server class PSU and not the consumer class na gipang gamit nato diri...

6.hdd type i could go for a SAS or pwede sad sata
> for high performance, use SAS... but for a SOHO server, SATA HDD's is ok man pud hinoon... but use the enterprise SATA HDD class..

[jack_cool]

^ try contact ni crx sa wired systems... basin maka tabang sya sa imohang need for the server DIY... answer ko gamay ha... short lang kay padung pa ko's office after ani...


1.Motherboard brand and model
> naa daghan sa Intel... from the old LGA CPUs to the latest one. the mobos are really build for server use... pwede ka mag single or dual socket CPUs... for a start, better use the LGA 1155 or 1150 Xeon platform. affordable man kaayo ni sila. but single physical CPU socket lang hinoon...

2.Processor ok ra nako ang quadcore adto ba ko sa i7 or sa xeon na processor
> use intel's Xeon line... Xeon E3xx series (V1 or V2 on LGA 1155 or V3 for LGA 1150) if mag LGA 1155 platform...

3.brand and model sa memory...
> naa daghan aning ECC... depende sa mobo speed... ok ra gyud ang DDR2 ECC mem for an application server gani...
> for the ECC mem brand na dali ra mapalit dha, Kingston man siguro... though, not sure ani...

4.brand and model sa raid controller that I could setup to raid 10
> not sure ko unsa'y nice na 3rd party raid controller...

5.power supply
> depende sa form factor sa chassis... better, use the server class PSU and not the consumer class na gipang gamit nato diri...

6.hdd type i could go for a SAS or pwede sad sata
> for high performance, use SAS... but for a SOHO server, SATA HDD's is ok man pud hinoon... but use the enterprise SATA HDD class..

Thanks kaayo boss lloyd naa man diay ka China noh hehehe cge kay basin ma late ka

[lloyd_joy]

hehehe... yes, bro, naa ko diri's Shanghai... abot nko's office... kulating napud ta ani's work load diri ron... hahay... no worries kay mao ni ang atoang "bread n' butter" diri... naks... hehehe...

diri, mapalit man lagi halos tanan. kanang need nmo, naa ra gyud na diri... labi na mag DIY ta...

[lloyd_joy]

@ bro jack_cool ,

about anang memory sa server na gi baligya sa B&S, ask unsa ang model. basin barato diri ug makatabang ko nmo na ari palit... para naa ka'y daghan options...