Watercooling Temps Question

[LadYKilleR8520]

---

Naa q i.ask regarding watercooling Temperatures bah, this is for Custom loop water cooling

Im assuming this for Quad GPU + Dual Processor + Ram watercooling

kay gahuna2 q bah, if taas kaau ang imong loop, then daghan kaau ug g.agian ang imong tubig, pasabot man nah nga init nah kaau ang imong water ig.abot sa uban parts sah? or dili??

EXAMPLE:

ang imong loop is as follows: 4XRAM > CPU1 > CPU2> 4XRAM > GPU1 > GPU2 >GPU3 > GPU4

so ang function sa water is too cool the cooling block.. then with water temp in mind

ang temperature sa water would be getting hotter everytime m.agi cya ug block, so walay cooling ang maabot sa pinakalast sa imong loop? sakto bah?

[Mr_ALDZ]

Naa q i.ask regarding watercooling Temperatures bah, this is for Custom loop water cooling

Im assuming this for Quad GPU + Dual Processor + Ram watercooling

kay gahuna2 q bah, if taas kaau ang imong loop, then daghan kaau ug g.agian ang imong tubig, pasabot man nah nga init nah kaau ang imong water ig.abot sa uban parts sah? or dili??

EXAMPLE:

ang imong loop is as follows: 4XRAM > CPU1 > CPU2> 4XRAM > GPU1 > GPU2 >GPU3 > GPU4

so ang function sa water is too cool the cooling block.. then with water temp in mind

ang temperature sa water would be getting hotter everytime m.agi cya ug block, so walay cooling ang maabot sa pinakalast sa imong loop? sakto bah?

kani TS if taas na guro kau imung LOOP. . . Better mas pas2 na imung pump. . . pra dali mu.travel ang Heat sa tubig. . .

[LadYKilleR8520]

^ ang aq concern is ang temp sa water inig.abot sa last nga block.. init nah man kaau nah dba

[werty]

Paspas pump, dako tube. Oversized rads hehe

[Sempron Guy]

murag pwede man nimo butangan ug rad after sa cpu loop

4XRAM > CPU1 > CPU2> 4XRAM > RAD>GPU1 > GPU2 >GPU3 > GPU4

anyway as long as paspas ang loop ( high-speed ) then wa man siguro na problema

[Mr_ALDZ]

^ ang aq concern is ang temp sa water inig.abot sa last nga block.. init nah man kaau nah dba

lageh TS init njud nah. . . so 1 of the sulotion is to push the water to cycle even though its not yet in the same temp as it is with previous pump. . . ingun ani mai mahitabu TS. . . . If water stay in the Block in X number of seconds mas muinit jud na sya. . .kai sa less number of seconds. . .meaning the water flowing is not that hot yet going to the second block. . . hehehehe! So meaning the faster the current sa water the cooler it can travel to all the blocks kai wla man kau sya na exposed ug dugay sa init. . .

[mourneblade00]

aha ta makapalit ug barato na watercooling?? kanang closed huh?? or if naay barato na open....pwde rapod...

[Mr_ALDZ]

@mourneblade00 - ang pinakabrato ako nahibaw-an nga water cooling nga OpenLoop is Lharkooler nga basic 5k na sya nya available pud kau na sya. . . hhehehe! For Close loop naa man 2K+. . . ngita2 lang sa mga CompShop. . .hehehe!

[werty]

kung mag closed loop man gani, ayaw jud tong nipis ug rad, mas maayo pag performance hyper 212 na tah 1.5k compared anah hehe.

[LordZhen]

bisag unas kataas ug unsa kadaghan imu rads, it will hit equilibrium

- - - Updated - - -

pareho rana principle sa sakyanan, mag steady rana iya temp bisag unsa na ka.init, unless kulangan kag tubig, then it will rise and overheat

- - - Updated - - -

TS because it is a loop, water heat will reach equilibrium, kay mo agi mana siya ug rad for cooling, unless stagnant na nga magbukal bukal najud na sa ka init, its moving on a loop, then it wil hit equilibrium. Nakalimtan nimu ug put into consideration na moving ang tubig sa sulod sa loop, and mo agi siya ug radiators to cool itself down. And the movement of the loop is fast for example 100 liters per minute.