Processor Temperaturesj

[Metz]

---

I have a software that will alert me if mo abot na ug 75C ang temp sa ako proc
I have an LGA 775 Intel 3.2Ghz nga dali ra mo-init kay murag wa nko matarong ug butang ang thermal paste.

Unsaon pagkabalo sa:

1. normal running temp,
2. ok nga temp kung daghan gi buhat ang CPU
3. sakto nga kainit para dapat ko maalarma(is 75 C too low or taas na ni )
4. dangerous level nga temp

as I understand mo shut down automatically ang computer kung mo abot ug dangerous levels, but di lng ko nahan ma stressed kaayo ako CPU, murag Idala nlng ni nko ug tech ugma aron matarong ang pagbutang sa thermal paste

[fish]

taas raman kaayo nang 75c bro... kay ang akong intel setup sa una, wala man tawn to kaabot ug 70c on stock cooling. try remounting your heatsink with a good thermal paste.... or better, buy a new heatsink.

[junmar4]

pirte kataas bai...

bag-o pa na siya? if so, basin wala jud na naarung taud ang heatsink...
if daan na, basin you need to put a new thermal paste...

ako ayo ana bai beh...

[Metz]

pirte kataas bai...

bag-o pa na siya? if so, basin wala jud na naarung taud ang heatsink...
if daan na, basin you need to put a new thermal paste...

ako ayo ana bai beh...

ty sa offer hehehe
sadly bag-o pajud ni mga 3months old pa nya naing-ani rani kay ako gilimpyohan ang computer nya murag wa najuy klaro ang thermal paste
adto lng ko ug PcExpress unya. mo average man cya ug 55C kung magbrowse browse rko but kung padaganan nko ug application nga daghan kaayo buhaton, mosaka daun to 73-77C

[vipvip68]

Those temps sound normal for a P4 3.2Ghz... naay P4 3.0 Ghz before that would reach 85c+ and idle at mga 60c+

[spookey]

i got a pentium D 3Ghz socket 775. idle at 55c and load temps at 75c with stock HSF. replaced the stock HSF with aftermarket cooler. now it runs idle at 42c and load temps at 62c. normal ni ang hi-temps sa prescott. mao tawag sa uban mga tao pres-hot.

[Metz]

ang ako kay 45-47 na at idle, natarong na ako heatsink
but mo abot ug 75-80 kung padagananan nko ug daghan nga processes.

how much ba ang above average performance nga heat sink? kay murag way ayo ako current heat sink, o way ayo ako thermal paste.

naay software nga mo intentionally consume sa processing power sa imong comp para mosaka ang temp?
para ma test nko ni.

[gtjr_ph]

Asus VR guard--------->520 pesos @ pcexpress
http://usa.asus.com/products.aspx?l1...97&modelmenu=1

grabe sad na imo kainit ang ako celeron(1.8Ghz) northwood cpu idle 46-48 C nya load 51-52 C

[Metz]

Thermal Specification:
67.7°C

Thermal Specification: The thermal specification shown is the maximum case temperature at the maximum Thermal Design Power (TDP) value for that processor. It is measured at the geometric center on the topside of the processor integrated heat spreader. For processors without integrated heat spreaders such as mobile processors, the thermal specification is referred to as the junction temperature (Tj). The maximum junction temperature is defined by an activation of the processor Intel® Thermal Monitor. The Intel Thermal Monitor’s automatic mode is used to indicate that the maximum TJ has been reached

mao rani info ako makuha pero wa ko kasabot can anyone interpret this?

[Un_Known_Data]

Taas naman kaau na if molapas na ug 60C kung P4 3.2Ghz, coz i remember sauna i use to have a Desktop just like that, dili man cya molapas ug 60C anyways, anybody got an idea where to get Arctic Silver 5 Thermal Compound here in Cebu, coz ive been having 75C with my core2 processor. and i believe na akong therpad pad kay wala nay klaro.