As maybe some of you know, I constantly travel back and forth.. every week.. so I needed a PC to cater to that specific need..
I would like to share to you my solution to this dilemma..
I present to you my ITX Build
"Sting"
The goal of this project was to keep the build as light and as strong as I can, within the budget.. Its a Gaming PC, with a hint of Horsepower.
THIS IS NOT FOR BLING, BLING IS HEAVY
Specs:
Processor: Intel Core i7-3770K
Motherboard: Gigabyte Z77N-Wifi
RAMS: 2X4GB Crucial Ballistics Tactical Tracer 1866mhz CL9 9-9-9-27 1.5V XMP
HDD: 1tb WD Caviar Black 7200rpm 64mb cache
SSD: 128GB Plextor M5 Pro Xtreme
GPU: Powercolor 7870 Reference Design
CASE + PSU : Silverstone SG05B-450 (450W 80+ Bronze)
First I did a Tiny Mod to remove the original 3.5/2.5 bays because it was too heavy for my taste.. so basically it went from this:

To This:

Here's a View from another angle, as you can see I managed to fit 1XHDD and 1x SSD in there, it minimized weight and increased total airflow from the 120mm front fans (planning to change the front fans, dont worry)

It's Amazing how little this case is compared to an installed Reference Design HD7870 (Perhaps now its obvious why I chose a reference design cooler for this)

The heat from the GPU just shoots out of the case, providing an independent airflow for the CPU and GPU
Heres the final Internal Wiring, I needed to keep in mind to keep the wires from blocking the airflow, specially in a case this small:

Here's a view from another angle (Planning to change the cooler to either a Noctua NH-L12 or a Corsair H60.. it will fit due to the mod that I did..

Did I mention I installed a PHP 80.00 handle on the case

And Yes, I can carry it, Its very sturdy FYI:

wala pa q ligo anah.. pasensya nah.. ahahaha
Close-UP sa handle
A LITTLE UPDATE>>>>
I will be modding this thing to something like this.. wala pah nuon na final