Motherboard Socket Problem (board wont detect CPU)

[jeyaner90]

---

mga sensei naa jud koy dako nga problem nga out of my hands nah..akong board di na mo detect sakong processor..
before the problem happened, nag use kog dual graphics mode sa a10 + 6670.. gi disable nako, then di na mo display. i tried restarting it then di na pud mo boot, igo ra pa on sa lights, og sa fan asta standby power sa board.. i tried resetting the bios, wala gihapon. and then gi tang2 nakong processor, pero while ga tang2 ko, i noticed nga nay "clicking sound" ang socket while pulling the lever w/ still the processor intact... no damaged pins ang cpu. then pag balik nakog taud, mo on siya then 1 second later, mo pawng dayon as if walay processor nga na detect sa board (yes gi emulate nako before nako gi taud ang cpu) ..tanan troubleshooting methods na buhat nako. it's either ang processor ang guba or ang motherboard.

really really need help badly >.>

Processor: A10 5800K
Board: ASUS F2 a55m LK2 PLUS
RAM: geil pc 12800 2x2gb (dile defective)

morag naa pakoy warranty sa enigma ani.

please close thread..mag repost ko.. thank you istorya!!

[werty]

retrace your work... reset bios.. try using 1 ram only. try on another slot...

PS

paki enumerate daw imo steps tanan steps gibuhat aron ma eliminate ang pabalik2 na suggestion

[zhieg]

unsay powersupply nmo ani sir? mo lights man kaha sa sulod, basin dili na kakaya ang psu.. try daw sa lain powersupply, bag.o ka mo check sa mga components nmo. pra mas ma trace nmo ang problema..

[hawkshock]

@TS: When you say, di na mo detect imong board sa imong processor, you mean sa una mo on pa nga walay problema? ni occur lang right after nimo gi dual grapics mode? if it is unsa ka dugayon nimo na set into dual graphics mode? kay maski imo na gi enable, it is safe as its stated sa manual, and it has nothing to do w/ that feature enable.

Solution 1: Try daw ug gamit lain processor for the sake lang sa test, pangulos lang kaysa magpa warranty ka nga ma ayo ra diay nimo ug ma proven ang CPU or mobo ba ang issue.

Solution 2: Try hard resetting sa BIOS from the board.

Solution 3: Try to check your PSU basin di cya ka daug if you enable dual graphics mode ug need niya ug taas2x na PSU.

Solution 4: Try 1 RAM at a time sa socket DIMM A or DIMM B etc...

Solution 5: Ug di ma dala, under pa sa warranty i balik didto. If you have purchased it online, contact the reseller I'm sure they will provide warranty.

I think lang ha bro, basin ni likoy or naay factory defect imong processor ana. Naka suway ko after a week or two ni likoy..di na mo display ug iyang temp mo saka ug maayo even using a higher cpu cooler. I don't know unsay cause kay wa manjud reason na ing ana akoang cpu ato wa manpud ko ma OC, so I concluded guba to cya.

I hope it helps.

[jeyaner90]

Silverstone Strider Essential Series 500w man akong PSU.. okay suwayon nako ron nya.. thanks sa mga tips.

[jeyaner90]

karon mo ON siya pero di gihapon mo boot..di na siya mo pawng after 1 second after "breadboarding" nako..short guro to..but still di gihapon mo boot.. no POST pud.. keyboard and mouse di gihapon ma detect unless i butang sa pikas PC nako..

wala man koy laing APU og PSU

[butitoy]

RESET BIOS.

you can not permanently disable feature in your procie

it's the BIOS you set to do and work as you like your procie would behave and performs.

[jeyaner90]

naa nakoy na kit an nga problema.. I tried to firmly push the board while ga on siya, then ig tod nako, mo pawng dayon..sama rag walay cpu nga gi butang, or wa na detect.. kay mo pawng mana diritso ang board kung walay cpu. i think ang board moy defective.. tsk.. bag o baya ni..

[werty]

u said already

"tanan troubleshooting methods na buhat nako. it's either ang processor ang guba or ang motherboard"

- i still dont understand why ur asking help if u already know it might be broken, i mean, u did ALL tests already dba?

[jeyaner90]

i forgot to mention kung naa pakoy wala na buhat, please tell..

hehe sorry ^^