project bikes / DIY restorations

[khym_prince]

---

share ninyo guys inyo mga project bikes or restorations,... so we can share ideas ug share mga parts na compatible sa atong bikes or mga pisa
ug maka pa nindot sa forum kai ang mga pictures, mapa DIY or nagpatabang ug mekaniko ... basta with pics ,,, mas mau..

ill be sharing mine ...
i have an old DT 125 , kara.an nakau but still running.. ug im planning na i condition ug if na.a budget himoun nako ug pit bike ..., ill post the pics as soon .. na .a ko oras ......



salamat ....

[tikotakz]

watch mode lang ko. hehehe

[chan-chan]

Share ko gamay:
nag restore ko sa karaan na XRM, ako nabuhat pa kay replaced the old swing arm with DBS swing and the rear foot peg with kanang i-welding sa chasis (raider style)

[khym_prince]

hahaha, nice one .. hinay hinay lang .. mao na g tawag project bikes kay nag agad sa atong budget ,, hihihihih payteeer if na.,a ka pics post ny boss .. so we can have a clear pecttuuuurrreeee.....

[khym_prince]

ug sa akong dt125, taod taod na wala ka dagan... tungod sa kadaghan sa motor maglisod na ug pa registro hahahaha

amo g limpyahan ang carbs which , na,.a indications nasaglan ug tubig ang carb. pati iya airfilter limpyohan pud still wala mo andar ..



so amo g ablihan ang head sa engine .. then pag check ang engine oil ug tubig nagsagol .. so amo g hugasan ug diesel until wala nay trace sa tubig ... then change oil jud dayon



pag balik sa head na,.a may 4 ka long screw sa ibabaw ang usa kai na wang wang na which dili na ma sira ug mau.. and mao to among conclusion nganu nasudlan ug tubig bisan na.a man siya mga covers ...




so g pa welding ( ang pag welding /machine shop , ( dili na kami nagtrabaho )so ila gi butangan ug steel para mo fit balik ang iyang screw ang upat ka buslot sa head niya para ma even ang pagka trabaho ..
tak tak pud 500 petot hihihi (kung na.a palang hiramenta pwede rapud kami mu trabaho )



then sa muffler na.a pud sulod tubig , coz ako g start dili man aso mugawas tubig man hahahaha, paeta , hugasan ug diesel ang muffler ug iya elbow g lino.an ug diesel para ma limpyo... then sa tambotso ilisdan pud ug asbestos.



then for teh gaskets na, dili na madala , nag palit mi ug bolenoid/ solenoid around 45 ang 12x12 inches



ang pinaka the best nga DIY kai ang pag pa humok sa ni gahi na rubbers/ o rings sa mga jets tanan guma tungod sa ka kara.an ni gahi na dili na ma twist.. pati ang intake going sa engine and sa air filter .... iya g pa bukalan sa init tubig .. ug since ting pani udto naman to .. iya nalang g dungan ug pa bukal ang itlog ... sayang pud daw ang kahoy dili lalim mangahoy

[khym_prince]

ang pics .. i sunod lang , maikog sa uban bisita nag share na pero ako wala...




" its not how fast we ride and how good we look on our bikes,
its how we know our bike inside and out"


vrrooommm

[iron_cross]

Hi Guys,
here is my restoration project...a Kawasaki Eliminator BN175 (red). bought it 2nd hand for about P43T here in Cebu, the Philippines..has a few missing parts though

[iron_cross]

a colleague of mine took the pictures while he was there at their shop:
stripped the frame barenot repainted yet in this shoot)

they checked the swing-arm and found a few holes due to rust/corrosion:

closer inspection reveals:

so, i had it repaired:

had the gastank repaired too:

upon closer inspection, a moon crater is revealed:

and had retouched:

[iron_cross]

had them facbricate the bracket that holds the fender, taillight and turn lights

a. flap with rear turn lights finally installed, thanks to my officemate who had the bracket(that holds the flap) fabricated

pics, shows some dirt/mud because I had it fixed somewhere far south in Carcar, Cebu.

another angle

b. mid-section body repair removed rust

before it had a hole due to rust now it has been repaired (sorry, no before and after pics)

c. had the fork repaired, had scratches removed to avoid fork oil leak.

[iron_cross]

bracket i ordered from Reliance finally arrived and looks similar to this except for the reflector..


sorry, forgot to post the swing arm repairs:

and