DHCPv6 sa IPv6

[divineskull]

---

naa ko question... nag setup ko ug dhcpv6 na lan... where ipv6 na ang mga ip...

naa koy prob.. ni release na ug ipv6 ang server sa iyang clients then.. try to ping para ma check ila connectivity..

ang server di ka ping sa clients
and ang clients di pod ka ping sa server??

unsay prob ani??


tabang pls??

[divineskull]

up up up up up....

[networkguy]

gi unsa nimo pag ping? hatag kuno screenshots...

[divineskull]

using "ping" command ra sir, sa command prompt..

Example:
ping fc00:1234:5678:1234::5

post nya ko piks sir.. wala pa ko sa workplace gud run...

sakto na ako gibuhat sir? or naay laen command para ping sa mga ipv6?

[divineskull]

up up up up up

[networkguy]

try kuno ni bai:

Ping IPv6 using DNS host name:

Open command prompt and type the following command
ping -6 {host.name}
ping -6 ipv6.google.com

To ping using an IPv6 address, the Ping.exe syntax is the following:

ping IPv6Address [%ZoneID]
ping 2001:4860:0:2001::68

To ping to the link-local address fe80::260:97ff:fe02:6ea5 using zone ID 4 (the interface index of an installed Ethernet adapter), use the following command:

ping fe80::260:97ff:fe02:6ea5%4

here are some resources for your reference:

Testing IPv6 Connectivity by Using the Ping Command (Windows CE 5.0)
Test IPv6 connectivity by using the ping command: IPv6
IPv6 Windows Command Line Examples
IPv6 tools ipconfig ping tracert netstat pathping

[divineskull]

woot wooot salamat kaayo.. try nya naku ang inputs sa laboratory... post lang nya pod ko diri unsay feedbacks..

[divineskull]

bai wala man jod..






request timed out..

[noy.juan]

try this -> Ping IPv6 IP Address With ping6 Command

[networkguy]

bro, does your LAN Switch capable of IPV6?

bai wala man jod..






request timed out..