Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1

    Default Would this motherboard still sell?


    So here's the story. I upgraded my system over the holidays, going from a Core2Quad Q9400 + ASUS P5P43TD PRO LGA 775 set up to an MSI Z77 MPower + Core i7 3770K. Pag assemble nako, I was having problems with DIMM slot 3 and 4, kay cge ra cyag restart. DIMM slots 1 and 2 were working fine. Long story short, sa akong ka excited wa ko kabantay nga nasipyat ko ug tangtang sa cooler when wala cya ni haom sa board and I nicked a pin on the motherboard's LGA 1155 socket (ouch). The MPower isn't cheap, so you can imagine unsa ko ka rattle when I found out about the bent pin.

    So I brought it back to Nutech SM where I bought it a day before and after consulting the local supplier, void jud ang warranty (aray na ko), they can't replace the item but they will ship it to Manila sa ila supplier to see what could be done. After 2 weeks, I finally got an update from Nutech yesterday. The supplier in Manila confirmed nga they cannot replace the item and void jud ang warranty (agay na sad) but they were able to re-bend the pin cguru mga 75% back to what it was before. Obvious kuno ghapon ang semi-bent pin but the good news is, all RAM slots now work. Everything on the board is fully functional but they're doing extensive testing sa board for now to make sure wala cyay deperensya ig ship balik sa board diri sa Cebu. Nipasalig pud ang Nutech nga if naay deperensya in the future, mu provide ra ghapon sila ug support sa item. Up to what extent, I'm not sure pero I will find out once makuha na nako ang board.

    So my question is; MSI Z77 MPower with semi-bent socket pin, void ang warranty but everything 100% functional and all accessories including box/manual/cables/driver disc complete. Will it still sell? Just wanted to get your opinions before I decide on what to do.
    Last edited by BURN_BaD; 01-06-2013 at 08:38 AM.

  2. #2
    hehehe imba jud ug support ang NUTECH, I can attest to that... they remind me of a certain someone who a lot of people surely missed...

    Anyway, it may sell pa bro... 100% working... pero mao lagi once imong i-layout ang entire story sa imong board, daghang ma turn-off... hahahah! It all boils down nalang to you, sell it without baring the entire story, or sell it with the story.

  3. #3
    C.I.A. werty's Avatar
    Join Date
    Feb 2003
    Gender
    Male
    Posts
    7,172
    Blog Entries
    1
    daku risk magkaproblema ang succeding users ani-even if aware sila sa history. those pins are fragile

  4. #4
    Be honest,tell the whole story and sell it at a very low price.I think someone is willing to take the risk as long na matest na working ang board

  5. #5
    Quote Originally Posted by dark_humbz View Post
    hehehe imba jud ug support ang NUTECH, I can attest to that... they remind me of a certain someone who a lot of people surely missed...

    Anyway, it may sell pa bro... 100% working... pero mao lagi once imong i-layout ang entire story sa imong board, daghang ma turn-off... hahahah! It all boils down nalang to you, sell it without baring the entire story, or sell it with the story.
    Dawat naman ko na nga naa jud ma turn off sa fact nga repaired item na cya. And yes, if I sell it low price na jud. Di sad ko buang nga mu presyo ani for anything near the purchase price haha

    Anyway, e.disclose man jud nako ang condition ug history sa item. Lisod na if dili kay kita may madaot in the long run. Sa kadugay na nako diri sa istorya, I always make it a point to disclose everything about the items I sell.

    Oh, and I've since bought another MPower for my system. Wai mas waldas? Hahaha
    Last edited by BURN_BaD; 01-06-2013 at 12:53 PM.

  6. #6
    pm me bro kung imong e-sell imong mobo...basta modagan pa lang...akoi palit basta price is right...kung magka problema man gani in the future...ako nai bahala w/ Netessentials (MSI distro)
    Last edited by simoko; 01-06-2013 at 01:11 PM.

  7. #7
    Nindot pmn kaau imong board boss, 100% working mn kha xa dba?
    Why sell it?

  8. #8
    @ferdzeferd: Selling it kay nipalit na ko ug lain nga MPower motherboard.

    @simoko: will keep you posted bro hehehe...naa pas Manila gi burn in test sa supplier. So far, everything is 100% working na daw, including the RAM slots. There's just the matter of the semi-bent socket pin and voided warranty.

  9. #9
    Ahhh. wew kalami.. pila sad kaha na?
    Nindota raba ana nga board oi.

  10. #10
    Wa pa sad ko ka decide hahaha. I have to run tests on it myself ig kuha nako sa item.

  11.    Advertisement

Page 1 of 2 12 LastLast

Similar Threads

 
  1. How much would this sell?
    By deejayy_214 in forum Computer Hardware
    Replies: 17
    Last Post: 06-23-2011, 07:53 PM
  2. How much would this sell?
    By zurita10 in forum Computer Hardware
    Replies: 7
    Last Post: 06-03-2011, 07:32 AM
  3. Looking For: BNEW: How much would this sell?!?
    By joveal11 in forum Computers & Accessories
    Replies: 2
    Last Post: 10-22-2009, 04:03 AM
  4. Would this work?
    By AMD_infinium05 in forum Networking & Internet
    Replies: 24
    Last Post: 01-09-2009, 01:17 AM
  5. MOD: would this be okay? I'm looking for someone to VoIP
    By HLadik2 in forum Computer Hardware
    Replies: 2
    Last Post: 06-12-2006, 02:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top