need clarification about my 2 different RAMS!!!

[boytangero]

---

I just want to clarify guys

I got two rams in my pc. same specs but different manufacturer.. one is transcend and the other is kingston (both 1GB ddr2 mems). during boot up guys, 1gb ra ang iya e detect but kung imo tan awon sa dxdiag inig human og boot up, 2gb mn ang naka display..

libog bitaw ko gamay.. is it okay na lahi2x ang ako ram?

if i'm not mistaken ang usa kay simm and dimm ang usa.

can you explain it guys?

[boytangero]

kinsa maka clarify dha? naay pinaskuhan

[Bricksand]

The 2 RAMS are incompatible so normally your PC will only read 1 ram.

A SIMM, or single in-line memory module, is a type of memory module containing random access memory used in computers from the early 1980s to the late 1990s. It differs from a dual in-line memory module (DIMM), the most predominant form of memory module today, in that the contacts on a SIMM are redundant on both sides of the module. SIMMs were standardised under the JEDEC JESD-21C standard.

A DIMM or dual in-line memory module, comprises a series of dynamic random-access memory integrated circuits. These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers. DIMMs began to replace SIMMs (single in-line memory modules) as the predominant type of memory module as Intel P5-based Pentium processors began to gain market share.

The main difference between SIMMs and DIMMs is that DIMMs have separate electrical contacts on each side of the module, while the contacts on SIMMs on both sides are redundant. Another difference is that standard SIMMs have a 32-bit data path, while standard DIMMs have a 64-bit data path. Since Intel's Pentium has (as do several other processors) a 64-bit bus width, it requires SIMMs installed in matched pairs in order to complete the data bus. The processor would then access the two SIMMs simultaneously. DIMMs were introduced to eliminate this practice.

The most common types of DIMMs are:

72-pin SO-DIMM (not the same as a 72-pin SIMM), used for FPM DRAM and EDO DRAM
100-pin DIMM, used for printer SDRAM
144-pin SO-DIMM, used for SDR SDRAM
168-pin DIMM, used for SDR SDRAM (less frequently for FPM/EDO DRAM in workstations/servers)
172-pin MicroDIMM, used for DDR SDRAM
184-pin DIMM, used for DDR SDRAM
200-pin SO-DIMM, used for DDR SDRAM and DDR2 SDRAM
204-pin SO-DIMM, used for DDR3 SDRAM
214-pin MicroDIMM, used for DDR2 SDRAM
240-pin DIMM, used for DDR2 SDRAM, DDR3 SDRAM and FB-DIMM DRAM
244-pin MiniDIMM, used for DDR2 SDRAM

[Bricksand]

ayaw kalimot unya sa akoa pinaskuhan ha!

[boytangero]

hehehe... but why do my pc recognizes 2gb ram when i access dxdiag? is my pc using 1gb or 2gb?

[JoanaRheyl]

check kuno boss if unsay compatible jd sa imong motherboard
isa lng gamita boss pra dli maglibog2x.. nya dapat same cla og frequency..
667mhz na? 800mhz? check daw boss

[jenrei06]

sayang want ko sana makihalubilo sa mga topic kaso diko maintindihan lahat

[boykolotz]

I just want to clarify guys

I got two rams in my pc. same specs but different manufacturer.. one is transcend and the other is kingston (both 1GB ddr2 mems). during boot up guys, 1gb ra ang iya e detect but kung imo tan awon sa dxdiag inig human og boot up, 2gb mn ang naka display..

libog bitaw ko gamay.. is it okay na lahi2x ang ako ram?

if i'm not mistaken ang usa kay simm and dimm ang usa.

can you explain it guys?

inig boot up? 1gb ra iyang basahon? sa asa na? kanang black nga boot up? naa kay VCard? usually VCard ang gibasa ana dle ang RAMS.

[keropi]

Unsay connection sa type of rams sa problema sa TS? I think TS knows about wikipedia...Taka...

Ill PM you something you can try TS..

[_hizuka_]

sa video card na ang RAM na nabasahan sa TS, Sudla jud ang bios TS para sure2x....