You have an internet plan from globe?
They gave you this Prolink 5200 right?
Wired? So meaning no Wifi?

"Haha Don't worry.I AM HERE. "

Want to set-up a wifi?
Oh you're not that good at setting it up?
But you Don't want to hire and pay others?
Well, I can help you

First here are some this you will need on this:
-Prolink 5200
-Router with Wifi(your choice)
-2 pcs RJ45 (Internet Cable)
-PC (laptop will do)
-Knowledge in READING and UNDERSTANDING instructions (sayun ra noh?).

Here is the actual picture of Prolink 5200:

Attention Haters: This step is an inverted mode, intended for users who do not know much of networking and do not want to undergo more hassles in setting up like searching for password for 192.168.1.1/globe. Makatabang ni sa mga first timer especially girls kay di man gud sila kaau techy.



If you have a Wireless Router and you want to use it without bridging Prolink 5200 you should do the steps below:

1. Turn on your own router. (ex. D-Link, Cisco, TP-Link)

2. Plug it to your computer.

3. Open your browser and type in http://192.168.1.1
A pop-up will appear and type in your username and password.

Default is:
username: admin
password: admin (sometimes 1234 or just leave it blank)

4. Once you are inside your router's setup page you may first want to setup some configurations like (Wifi password, Mac Address, SSID or your Wifi's Broadcast ID, Router password;be sure to write it down....and other settings). If you want a wifi without password skip this step.

5. After you done this look for the option DHCP or DHCP Server, click on it and Turn off or disable it. After this reboot your router.

6. Unplug the RJ45(internet cable) from the computer and plug it to your Prolink 5200. Use the LAN to LAN port... If you plug it on the WAN port of your router it will not work.

7. Use another cable of RJ45 and plug it to your router's LAN port and plug it to your Computer.

8. Happy Browsing! "Don't forget to pay your bills.