View Poll Results: Which is the Best NTFS or FAT for USB Flash Drive?

Voters
5. You may not vote on this poll
  • NTFS

    2 40.00%
  • FAT

    3 60.00%
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1

    Default NTFS or FAT Format?


    Unsay maayo nga format sa USB Flashdrive mga istoryans NTFS or FAT or FAT32?

  2. #2

    Default Re: NTFS or FAT Format?

    ang advantage man gud sa NTFS na format nga flashdrive tS kay paspas sya mu transfer ug files pero dali ra sya ma damage..
    mas mu refer ko sa FAT format kay mas dugay sya maguba,, nahbaw.an rapud na nako sa symbianize.com.

  3. #3
    C.I.A. eXpLoDe's Avatar
    Join Date
    Oct 2010
    Gender
    Male
    Posts
    6,069
    Blog Entries
    1

    Default Re: NTFS or FAT Format?

    FAT not FAT32. mao na ang default inig palit nimo ug mga flashdrive.

  4. #4

    Default Re: NTFS or FAT Format?

    mas nindot ang NFTS... FAT is only limited up to 4gb per single file ang ma copy... larger than that file kay di na ma save... FAT is fine if your flash drive is only 4gb... I wouldn't recommend if you have an 8gb or higher flash drive... Hasul kaau... naa raba juy mga file nga dagko kaau mo exceed ug 4gb... like Bluray, BRrips, .mkv formats... or installers nga gipang .iso or other image files...

    4gb flash drive and lesser = FAT
    8gb flash drive and higher = NTFS

  5. #5

    Default Re: NTFS or FAT Format?

    Choosing between NTFS, FAT, and FAT32

    You can choose between three file systems for disk partitions on a computer running Windows XP: NTFS, FAT, and FAT32 Use the information below to compare the file systems.

    NTFS is the recommended file system for the following reasons:

    NTFS is more powerful than FAT or FAT32, and includes features required for hosting Active Directory as well as other important security features. You can use features such as Active Directory and domain-based security only by choosing NTFS as your file system.

    It is easy to convert partitions to NTFS. The Setup program makes conversion easy, whether your partitions used FAT, FAT32, or the older version of NTFS. This kind of conversion keeps your files intact (unlike formatting a partition). If you do not need to keep your files intact and you have a FAT or FAT32 partition, it is recommended that you format the partition with NTFS rather than convert from FAT or FAT32. Formatting a partition erases all data on the partition and allows you to start with a clean drive.

    Whether a partition is formatted with NTFS or converted using the convert command, NTFS is the better choice of file system. For more information about Convert.exe, after completing Setup, click Start, click Run, type cmd, and then press ENTER. In the command window, type help convert and then press ENTER.

    In order to maintain access control on files and folders and support limited accounts, you must use NTFS. If you use FAT32, all users will have access to all files on your hard drive, regardless of their account type (administrator, limited, or standard.)

    NTFS is the file system that works best with large disks. (The next best file system for large disks is FAT32.)

    There is one situation in which you might want to choose FAT or FAT32 as your file system. If it is necessary to have a computer that will sometimes run an earlier version of Windows and other times run Windows XP, you will need to have a FAT or FAT32 partition as the primary (or startup) partition on the hard disk. Most earlier versions of Windows cannot access a partition if it uses the latest version of NTFS. The two exceptions are Windows 2000 and Windows NT 4.0 with Service Pack 4 or later. Windows NT 4.0 with Service Pack 4 or later has access to partitions with the latest version of NTFS, but with some limitations: It cannot access files that have been stored using NTFS features that did not exist when Windows NT 4.0 was released.

    For anything other than a situation with multiple operating systems, however, the recommended file system is NTFS.

    Once you convert a drive or partition to NTFS, you cannot simply convert it back to FAT or FAT32. You will need to reformat the drive or partition which will erase all data including programs and personal files on the partition.

  6. #6
    C.I.A. werty's Avatar
    Join Date
    Feb 2003
    Gender
    Male
    Posts
    7,172
    Blog Entries
    1

    Default Re: NTFS or FAT Format?

    FAT for compatibility to other devices...........

  7. #7

    Default Re: NTFS or FAT Format?

    Quote Originally Posted by boyoplok View Post
    mas mu refer ko sa FAT format kay mas dugay sya maguba
    dugay maguba in what aspect bro? i believe NTFS is way much more resilient than FAT.

  8. #8

    Default Re: NTFS or FAT Format?

    go for Fat if FlashDrive

  9. #9

    Default Re: NTFS or FAT Format?

    it depends sa size.

  10. #10

    Default Re: NTFS or FAT Format?

    naa koy 16GB flash drive, naka saved lagi ko ug 8GB nga single folder? FAT format.

  11.    Advertisement

Page 1 of 2 12 LastLast

Similar Threads

 
  1. gihimong external hdd(fujitsu 80gb ide) format ntfs or fat?
    By misterbot in forum Computer Hardware
    Replies: 5
    Last Post: 09-30-2012, 06:45 PM
  2. Best File System Format for a 4gig flash drive?!Ntfs or Fat32?
    By dragwarz05 in forum Software & Games (Old)
    Replies: 3
    Last Post: 06-24-2010, 07:00 PM
  3. Want To Buy: psp slim or fat
    By Koikoi in forum Gadgets & Accessories
    Replies: 26
    Last Post: 10-15-2009, 08:46 PM
  4. manuals po!. .doc or .pdf format.
    By j4l4ni in forum General Discussions
    Replies: 0
    Last Post: 08-04-2008, 09:20 PM
  5. Replies: 15
    Last Post: 11-14-2007, 12:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top