cdrking wireless router problem pls help.....

[kiboy]

---

mga boss cdrking wireless router nako dili ko ka internet sa ako wifi using my laptop,,makasulod ko maka connect but dili man maka browse..pls hlp naman jan..

[blizzaga4]

If your router has a ping feature try to ping google daw thru your router....

[lazaro4ever]

dali ra na sir.. go to your modem gui and turn off the power saving mode.. that feature is a little crazy sa cdrking..

if I remember correctly, that's in the connection speed or something.

[blizzaga4]

kinsay OEM aning CD-RKing routers? hmmmm

[siopao1984]

kinsay OEM aning CD-RKing routers? hmmmm

maypa cguro katong encore na lang na router

[kiboy]

naa to nagpost ani nga probs nya naa to nag hatag ug config unsaon kapoy lang ukay..naay makahatag same ato plssss.

[lazaro4ever]

naka encounter ko ani na problem before sa akong Cdrking Wireless-N MIMO i think. dili cya maka connect sa laptop, psp and phone.. naa lng koy gi off na feature.. ok na dayn..

[jap_yu]

cdrking products, hope for the best expect the worst..

[MrCheap]

1. Open your Internet Explorer, Firefox, or any available internet browser. Type in 192.168.1.254 in your url browser. Don't forget the “http://“. This will bring you to your router's WLAN page setup embedded in your router's program.

2. Please change the wireless network name ex. owners name, then apply changes. Click “Apply Changes” button and wait again for 15 seconds for the router to restart and initialize.

3. WLAN ACCESS POINT. select the encription supported ex. WPA. passphrase, fill in the key values. ex mr20032cheap30322 this is ur network key or password in wifi connection. Then apply changes.

4. Note: you can choose whatever type of Encryption you want to use. In this sample WPA was used. You can fill any word (letters and Numbers) that you want with this field, Just Remember the word you filled in this field, because this will serve as the password for your wireless connection

5. Next click on the TCP/IP Setting then LAN Interface and change the IP Address and DHCP Client Range then click “Apply Changes” button and wait again for 15 seconds for the router to restart and initialize.

6. Change the default ip address to 192.168.10.254 (please note the highlighted number difference compared to the first IP address 192.168.1.254)

7. Also change the DHCP client range to 192.168.10.1 to 192.168.10.253, apply changes

8. On the browser’s URL or Address bar, type the IP address of the router which is 192.168.10.254, and then press the “enter key”. Please note this step because this is what I missed that is why I was not able to activate it the first time.

9. Now click on the Management and click on “Status”, to check if your WAN Configuration has an IP address and that you are already connected to the internet.

If in case you already have programed your router using other ways and still not working, then you follow this process and still not working, I suggest that you press the reset button at the back within 20 seconds (not sure if the router should be on while reseting it, mine is running while its running, then restart it). Repeat this process all over again.

[kiboy]

boss tnx sa tips ...