Need help on my procie temperature

[mike1293]

---

Maaung hapon Istoryans,

Nikalit ra ni ug flash na overheat detected!



-I`m using coolermaster TX3
-Nagtan-aw ra ko ug movies nya ni kalit lang ug pop ang warning, ni prompt dayun for restart, ako ra g-cancel kay pagtan-aw nako sa core temp 27 c, so normal ra.
-Pero ang max temp kay 256c!
-naunsa mani? kuyawan sad ko ani da..


salamat istorya.

[Hitchiker]

icheck ang heatsink ug naluag na.. butangi daun ug thermal paste.

[werty]

might be false alarm. try stressing your procie and check temps asa sya highest...

[street_of_no_return]

ask lng pud tah ko bah.. akung cp kai mga 2 years na walai thermal paste kahapun pako naka bntay kai naa abot ang temp og 80c(sa bios). pero ako na gebutangan kahapun.. okey rani.? wala ni side effect.?

[werty]

ask lng pud tah ko bah.. akung cp kai mga 2 years na walai thermal paste kahapun pako naka bntay kai naa abot ang temp og 80c(sa bios). pero ako na gebutangan kahapun.. okey rani.? wala ni side effect.?

kung stable aw ok ra... padaun

[balipseyev]

ask lng pud tah ko bah.. akung cp kai mga 2 years na walai thermal paste kahapun pako naka bntay kai naa abot ang temp og 80c(sa bios). pero ako na gebutangan kahapun.. okey rani.? wala ni side effect.?

Ok ra man na bro...

[fern-pewee]

kk ra jud na migs as wat dey sey....dont worry too much...tnawa lang ang performance pd..nga need ang line niya stable dile murag heartbeat! hehehehe

[eXpLoDe]

wala man kaha nag problema imong system unit like: Hang-up, auto-restart, slow loading of applications. ok ra kaayo na TS. bugnaw man gani na daan imong procie. hehehe

[rejiel]

if imong system stable ra TS, then might be false alarm lang na....dont worry be happy...hehe

[freelancetech]

@street: Naa jud nay degrade sa performance as well as life span since it has been stressed and used w/o thermal paste. Try pud ko ana and my procie suddenly not working well till it dies hehehe...

@TS: Basin wa nimo mataud ug tarong ang CPU Cooler. Also I dont recommend you use CM its a crap for me. Get a better one like DEEP COOL, inexpensive cooler but excellent performance. Also check your thermal paste basin dry na kaayo. Also using those third party softwares like CPU TEMP will might provide false/wrong reports. Use AIDA64 its better and reliable.