My HDD AGAIN

[acre020]

---

gud pm mga bosing,

naa ko na encounter nga problem

ako ge try ig raido 0 ako 2 same HDD and then ge partion 2 half ( experiment nako )

then after nko ug install sa OS cgeh nlng sya ug BLUE SCREEN so ako sunod gi buhat is ge disable ang raid then and is nlng nako ka HDD ako ge installan ug OS but then the time na e confrim na nako kung aha na harddisk nako e install and OS mag cgeh na man lang sya UG loading, as in di na gyud mo irug;

na daot kaha ni ako HDD?

hope matabangan ko ninyo

[AMD_infinium05]

well, if you tried the standard way of installing OS without fancy RAID or AHCI.

i could say there's something wrong jud.. have you tried the other HDD? or both drives shows the same problem? if yes. perhaps your cable?

if you have are sure your cable is right... check your BIOS settings.. load optimal settings / defaults... if it doesnt solve your problem, it could be your motherboard?

a BIOS update is your last resort to try resolving you RAID problems.

[acre020]

na try nako both HDD and comes with the same problem,

about sa lain nga HDD wa pa sad ko ka try kay la ko lain HDD nga bakante,

about sa cable I think wala blema kay in the 2st place ma detect man ako HDD sa bios,

bout sa MOBO murag di cguro oi bag-o pa au ni; nya in the 1st place sad ni appear ra ni nga problem is when nag try nako'g expirement og RAID 0 then PARTITION 2 HALF

and about sa BIOS wa pa sad ko ka try ug update kay bag o pa man sad gud ako mobo.

[AMD_infinium05]

do you have Identical harddisks?...

same model, same cache, same firmware (as much as possible), same size of course

[acre020]

yas boss 2 x1TB WD green 64mb

[acre020]

i raid ) ra man ta koni para pang drive D ra pero la pa man ko HDD para pang OS gyud ( like SSD) mao kani lng sa ako gi try nya gi try sad nako ug expirement

[siopao1984]

change SATA Operation from AHCI to ATA mode or compatibility mode from ur BIOS. that should be resolved

[acre020]

ah so wa diay ni prob. ako HDD bos ehehe nice kung wa xD

[siopao1984]

delete first ur raid then set the bios as per my instructions above

[acre020]

change SATA Operation from AHCI to ATA mode or compatibility mode from ur BIOS. that should be resolved

sa integrated periperals gihapon dapit ni boss?

kay katong nag raid ko kay gi sunod lng man gud nako ang naka instruck sa manual boss