front panel audio IO noise

[wikki]

---

guys unsa cause ani buzzing noise when connecting a device to the front panel?

my earphones a4tech mk650, if e plug sa backpanel no buzzing noise, if front panel e plug grabi kaayo ang buzzing noise.

the only instance nga ma wala ang buzzing noise is when mu cpu is running at 50% up load.

using the case thermaltake v4. if naka contact ang connecting wire at the backpanel kay dira man nako gi lusot maka cause bana distortions or noise?

[werty]

sounds to me like loose contact ang front panel connection. recheck lang daw boss... u may also want to check your soundcard driver utility and uncheck something related to "disable front panel audio jack connection" see if this helps...

[wikki]

disabled naman ang option. maybe loose cguro or something. will check tom, kapuy nako karon. lol

[Vino Kid]

cable na bay, minus nga klase. minus ug shield.

pareha ra na sa akoa pag front panel naay unwanted static noise.

[wikki]

cable na bay, minus nga klase. minus ug shield.

pareha ra na sa akoa pag front panel naay unwanted static noise.

unsa na minus klase and shield wala ko ka G.. lol

unsaon pag fix ani? naay ma taud nga plug or converter thingy to cap the noise?

[Vino Kid]

kasagara gipang taud sa mga front audio channel audio cable is not that fully shielded or naa man shield pero dili sya putos kaayo. maybe to minimize production cost.


sample sa shielded audio cable ug unsa iya ikahatag ug kaayuhan sa audio quality output

image courtesy from mediacollege

basaha na alng ni hehehehe para maexplain ni wiki
Shielded cable - Wikipedia, the free encyclopedia

[werty]

unsa na minus klase and shield wala ko ka G.. lol

unsaon pag fix ani? naay ma taud nga plug or converter thingy to cap the noise?

unsa ni bro, magtingog ang front-panel but with noise? or wala jd sya sounds and only noise. subaya lagi wiring bro, bsin nag loose contact ra na. u dont need it changed to shielded coz ang case sa pc already acts as shield and too short ra pud ang wire to capture interference. subaya ra na imo wirings end-to-end bsin naa loose contact or d mao pagkabutang.

[eXpLoDe]

possible na grounded between the front panel board and the case.

[dhekoy33]

naa jud na grounded between chassis to front panel,check bro imo wiring.

[EarlZ]

An easy way to test this is to remove the front i/o connectors ( if its possible ) once removed from the casing you can tell where the fault is.