Case Airflow: Positive or Negative?

[chang87]

---

Unsa inyo gamit na airflow sa inyo case mga istoryans?

I'm using Positive airflow sa ako case. (SilverStone PS05B-W)

4 intake (1 front, 1 bottom, 2 top) and 1 exhaust (1 rear).

Here's a link I just found from the SilverStone website Itself.

SilverStone Technology Co., Ltd - What is Air Pressure

Share lang pud sa inyong thoughts and opinions ani guys.

[cloud]

akoa kay 2 intake (1 front, 1 bottom) and 3 exhaust( 1 rear, 2 top) cause hot air always goes up. planning to add 1 more on the front for intake.

[eXpLoDe]

akoa kay 2 intake (1 front, 1 bottom) and 3 exhaust( 1 rear, 2 top) cause hot air always goes up. planning to add 1 more on the front for intake.

+1 i agree ko we have the same set-up in common.

[cursememore]

still stack cooling effect from raven 2 to fortress 3, hot air must go up XD

[Jason4eveR]

airflow nako sa ako case...

1*240mm intake front
1*200mm intake side
1*140mm exhaust back
1*120mm intake after the HDD cage

1*200mm exhaust top
radiator
2*120mm intake from inside of the case then exhaust to the top

[werty]

depende sa location sa blowholes---

front fans and bottom-side fans are suppose to blow air in----

rear-top and rear fans are suppose to blow air out---

about positive vs negative pressure, kung makaya a balance should be maintained, how much moving air in should be as much moving air out---but subjective na ni na topic--- and this is jst IMHO...

have fun experimenting pre

[monk3y]

akoa kay 2 intake (1 front, 1 bottom) and 3 exhaust( 1 rear, 2 top) cause hot air always goes up. planning to add 1 more on the front for intake.

murag ani gyud mahitabo sa akoa... still building it though

[chang87]

try ko ug stresstest 2mrw using positive airflow... check nq naa ba difference... experiment

[EarlZ]

Well I guess mine can be considered positive, 3 140mm intake in the front and 1x 120mm exhaust at the rear.

[chang87]

Well I guess mine can be considered positive, 3 140mm intake in the front and 1x 120mm exhaust at the rear.

yes it definitely is... hehehe...

as what they say, every chassis/model is different when it comes to case airflow...