AMD OverClock

[navs]

---

hi mga bro,

i decided to open my new topic here about OC coz the previous topic "Overclocking 101" its crowded na..and its seems wlanay update... no one post there idea's about OC anymore., i finished read all the post message under the "Overclocking 101 Trend" and getting some idea's about Oced.

i hope u guys help me about this:

Specs:

AMD Athlon 64 3000+ Socket AM2(940) @ 1.8Ghz
GeForce 6100 (Biostar Mainboard) w/ built-in 128mb shared v-card
80 Gig Seagate Barracuda SATA
512MB KingMax DDR2-667mhz

OCed from 1.8Ghz to 2.0Ghz

Results:

- So far my system work stable and CPU temp 18-22degC and doesn't exceed 30degC.
- i only change the FSB in the BIOS Mobo from 200.9mhz to 223mhz (multiplier 9 lock) to acquired the 2.0Ghz


Questions:

- is it ok to OCed Mobo without external v-card?
- is built-in v-card ok for OCed?
- i increase v-card size from 128mb to 256mb by sharing my memory size is it safe?
- i notice the heatsink on the v-card (built-in) is very hot, is it normal?
- do i need to change the setting of the RAM?
- i didn't change the setting of the RAM in Bios...it is safe?



Default value @1.8ghz base on CPU-Z output:

CPU clock:
core speed : 1801.2mhz
multiplier : x9.0 (lock)
bus speed : 200.9mhz
ht Link : 1004.5mhz

Memory:
Timing Frequency : 301.4Mhz
FSBRAM : CPU/6
CAS#Latency : 5.0 clocks
RAS#to CAS#Delay : 5 clocks
RAS# Precharge : 5 clocks
Cycle Time : 15 clocks
Bank Cycle Time : 21 clocks
Command Rate : 1T

Oced @2.0ghz

CPU clock:
core speed : 2007.2mhz
multiplier : x9.0 (lock)
bus speed : 223.0mhz
ht Link : 1115.1mhz

Memory:
Timing Frequency : 334.5Mhz (change from 301.4mhz)
FSBRAM : CPU/6
CAS#Latency : 5.0 clocks
RAS#to CAS#Delay : 5 clocks
RAS# Precharge : 5 clocks
Cycle Time : 15 clocks
Bank Cycle Time : 21 clocks
Command Rate : 1T

Mga bro safe ba kong OCed ko until 2.0ghz? so far okie raman ang CPU temp kong mo OCed till 2.0ghz pero ang concern lang nako kay mo init ang heatsink sa v-card sa mobo (built-in)..Im using 2.0ghz OCed around 1 week pero im back to default value 1.8ghz after i notice na mo init pag ayo ang heatsink sa v-card(built-in).


Any idea's.... is appreciated!!!! :mrgreen:


Picture will post soon...dli manko kabalo mo post ug picture gud.

[Cool18]

unsa na motherboard imo gamit bro? RAM? Heatsink?

[navs]

@Cool18
unsa na motherboard imo gamit bro? RAM? Heatsink?

AMD Athlon 64 3000+ Socket AM2(940) @ 1.8Ghz
Biostar GeForce 6100 (Biostar Mainboard) w/ built-in 128mb shared v-card
chipset GeForce 6100
80 Gig Seagate Barracuda SATA
512MB KingMax DDR2-667mhz

here's the link of my motherboard : http://www.directron.com/geforce6100am2.html


result from CPU-Z during OCed:

[Ian]

I suggest you get a separate Video Card so you can maximize your RAM and get a better HSF and PSU too.

[Teban2006]

Bro question lng about the temp:

What is the room temp during your test and have you check the temp status at bios ? does it also show 20C?

[navs]

@Teban2006
i'll check tomorrow bro the temp inside the bios...i guess its around 20-23degC.. by the way bro y u asking me to check the temp inside the bios? is SmartGuardian is not accurate? this software is package in the CD istaller sa motherboard.

sometimes bro after loading the windows the CPU temp lowered to 16-18degC. without opening any programs., opening Adobe Photoshop7/warcraft/counterstrike goes to 18-22degC in ordinary room...kong ting-init ang panahon it goes to 22-25degC...wla gyod ko ka notice ni reach cya ug 30degC...during rainy days...CPU temp lowered to 15-18degC.

i try to check the temp inside the BIOS...i'll post it tomorrow. basta murag 21-23degC rato cya.

[Teban2006]

For comfirmation lng bro mas ok man gud na nga to monitoring software result ang e compare. Anyway its a good temp bro murag lami lami panang e push ug overclock para tower down dayon, hehehe By the way bro aircon ba ang place?

[Cool18]

naay DRAM/Memory Frequency sa imo BIOS bro?

[potterboy]

better man cguro kung separate ang v-card.

[cHoLoCoY]

this is a tight topic for all the AMD Enthusiasts,.....

i dont care if Intel is faster or cheaper....... i'll stick with AMD