Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1

    Default No Video Output|Entering Sleep Mode


    Here is the problem. Every time I turn on my PC, it boots up but after a few seconds my monitor turns black and then I will see this message "NO VIDEO OUTPUT (below that) ENTERING SLEEP MODE". The PC seems to be running, but the monitor is off and the video card's fan (basing from my observation) seems to spin at 100% then halts back to like its usual slow spin. Without this problem before, my video card doesn't seem to do that. Another thing is the system is running normally, cpu fan, and other fans working. The only thing lacking is I cannot see anything.
    What seems to be the problem? Just a back story, prior to this, I never had this problem. This started happening after I cleaned my PC. By cleaning I only mean doing a blower thing and removed the parts. Nothing more than that.

    Heres's my specs for reference:
    intel e7500
    asus p5kpl am se
    9800 gt sonic ed.
    fsp 550w
    OS: windows ultimate 32 bit

    Here's what I have done so far:
    1. Retraced my steps to check where I did wrong. I only touched the hard disk and video card. I used the blower which was sold from tech mall.
    2. One time, I was able to get past the NO VIDEO OUTPUT message and I went straight to safe mode and did a factory reset. Problem solved, but now... its back.

    Please give me some other advice as to why this happened or what could be causing this? Any tips on how to prevent this from happening again will be really appreciated. Luckily, just now, I kept rebooting the PC and I was able to post here.

  2. #2
    Senior Member
    Join Date
    Nov 2003
    Gender
    Female
    Posts
    822
    hi , were you able to see the bios? if yes , can you try the built in video card ...

  3. #3
    Quote Originally Posted by luwid View Post
    hi , were you able to see the bios? if yes , can you try the built in video card ...
    already tried using the built in.. had the same message when i tried it.

  4. #4
    Senior Member
    Join Date
    Nov 2003
    Gender
    Female
    Posts
    822
    wala dyud bios mu appear?

  5. #5
    just an update... ive searched something about disabling the onboard video card because it might conflict with the new one installed (9800gt) could this be possible?

  6. #6
    Senior Member
    Join Date
    Nov 2003
    Gender
    Female
    Posts
    822
    yes.. thats what im thinking.. sa setting sa bios.. nag conflict ..you have to choose which one will be used ..

  7. #7
    Quote Originally Posted by luwid View Post
    yes.. thats what im thinking.. sa setting sa bios.. nag conflict ..you have to choose which one will be used ..
    okay... i might need to reset.. i believe i can access the bios.. can you give me some instructions on what to look for specifically? I will try to that after your instructions. Thanks.

  8. #8
    Senior Member
    Join Date
    Nov 2003
    Gender
    Female
    Posts
    822
    and also . try to change your CMOS battery... so that when you save after some setting , it will be saved..Try to check the manual on your mobo bro asa na dapita ..diko familair sad..

  9. #9
    after some reading on my mobo.. here is what i found...

    Initiate Graphic Adapter [PEG/PCI]
    Allows you to decide which graphics controller to use as the primary boot device.
    Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

    Is this the one that we are talking about?

  10. #10
    Senior Member
    Join Date
    Nov 2003
    Gender
    Female
    Posts
    822
    i believe so.. just play with those options...

  11.    Advertisement

Page 1 of 3 123 LastLast

Similar Threads

 
  1. Want To Buy: VGA/HDMI to video output
    By COMCAM in forum Computers & Accessories
    Replies: 10
    Last Post: 09-14-2009, 09:53 PM
  2. Sleep mode sa laptop
    By menderouv in forum Computer Hardware
    Replies: 4
    Last Post: 09-09-2009, 10:27 PM
  3. no video capture hardware pop up....
    By ralf in forum Computer Hardware
    Replies: 5
    Last Post: 09-05-2009, 09:55 PM
  4. XBOX 360: No video No sound
    By adrian168 in forum Software & Games (Old)
    Replies: 17
    Last Post: 01-02-2009, 09:21 AM
  5. No Boot/No Video after changing proc
    By kamandag in forum Computer Hardware
    Replies: 5
    Last Post: 12-03-2008, 03:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top