LAN not Connecting to Internet..help

[dcshoeboy]

---

maaung adlaw mga bossing,

ang akoa Router which is Dlink na DI-604 kay dili mo connect sa internet but naa cya lan connected man..but ang mga pc kay dli mo connect sa internet

den pag i direct nako ang PC to DSL modem kay mo connect man pd nuon..

ngano diay na ing.ani ni? ni kalit ra pd ni cya kay kadto niaging adlaw mo connect paman ang mga PC sa internet

unsaon mani cya?

[moklo]

e reset daw na imong router bosing.

[dcshoeboy]

na test napd na nko ug reset..pero wala man ghapon

[StingerRay]

@dcshoeboy: Have you reconfigured settings in your router? Or someone mess up and reset the router and change to factory defaults on your settings? Do you know how to access your DLINK router?

Then, you have to configure your router again?

Steps:

1. Connect your patch cord from your modem to the WAN port of your router.
2. Reset your router at the back of the device. (small button switch)
3. On your desktop PC, at the lower right bottom (network connection icon), in TCP/IP properties, obtain the IP address automatically.
4. Refer to your manual and open a browser, to access this homepage on your router settings, etc.

Here's a sample snapshot:



5. After you have properly configured, test your connection and your good to go.

[dcshoeboy]

@ StingerRay..thanks for your input bro,followed your instructions but still i cant connect to the internet

by the way this is my DEVICE INFORMATION

WAN

MAC ADDRESS 00-E0-4d-61-88-0A
CONNECTION DHCP DISCONNECTED

REMAINING LEASE TIME 00:00:00
IP ADDRESS 0.0.0.0
SUBNET MASK 0.0.0.0
GATEWAY 0.0.0.0
DOMAIN NAME SERVER 0.0.0.0

after i reset the router

[StingerRay]

Is your DHCP on your router enabled? Does your router can obtain an IP address from the modem?
Can you post screenshot bro to be more specific so that I can help you out and also for me to visually see it?

[dcshoeboy]

naa ra ang screenshot bro

[StingerRay]

Wala ka detect imo WAN from the modem. Try kuno ug "DHCP Renew". Dapat naay makuha na IP address imo WAN from the modem. Naconfigure na nemo ang imo router or diretso ra ka sa status?

Added note: Configure your router using the WIZARD on the Web Configuration.

[dcshoeboy]

na configure na nko using run wizard then ang ako gi choose kay Dyanamic IP Address..then mao na ang screenshot

gi try napd nko ug DHCP Renew..then wala ghapon

[StingerRay]

Girelease nemo ang DHCP ug gi-renew?
_________________________________


unsa nga IP makuha kung imo i-direct ug connect from modem w/o the router? auto obtain ba na IP or mag-assign ka ug static?