Which is which?

[Ryuugan]

---

All,

i have a problem on my pc. when i try to turn it on. the LED only blink. then nothing happens after all.. i tried to install another PSU, but problem still persist. i also tried using another vcard which is a green ed. but problem still persist. what else should i do/try to fix the problem?

[Sempron Guy]

you mean the monitor led? Reseat your ram module.

[cjmagowan]

or check cpu heatsink

[decnet]

specify unsa nga LED bro

[werty]

which LED did u mean? on the cpu or monitor?

if its on the CPU and theres no beep or whatsoever, try reconnect all connectors especially power and data cables. if d japon, try to reset cmos, ug wala jud? remove external and internal connections and leave only enough connected to start ur computer(no hdd,fdd,usb devices and other thats not required to make a POST)

[jpaolof]

try to strip down the system with only cpu, psu, mem on the mobo, include monitor and kyboard. also try to reseat the cmos battery.

[acronis]

yeah try daw removing your memory.... clean the memory... then place it back...

[jakeneuman]

kung led sa monitor magblink., either memory or vcard.. naa ra anang duha.

[Ryuugan]

sorry for the late reply...LED sa akong CPU. since ako Case kay Acrylic. mo blink xa ka isa then off ra daun... tried doing mobo + ram + cpu with V8 cooler only... still d same

[cjmagowan]

probably heat problem