using 2 dimm different model

[siegfreid]

---

close thread mods, solve na problem

[Sempron Guy]

Ok ra ma na bro, pero murag naay need nga I set nimo ang cas latency provided if lahi ang cas latency sa duha

[Kibir_Tidibir]

kasuway ko ang usa kai pqi ang usa kai kingston... ok ra man.. pareha ra man pud to sila cas latency...^^

[tSUB]

OK ra man na bai as long nga pareho ang timings sa imohang rams.. I'm using two different modules, one Kingston (2gb/400MHz) and one generic (1gb/400MHz). Basta pareho lang ang values sa timings like CAS and RAS, wa jud na problem sa dual channel..

[siegfreid]

kapalit ku crucial ballistix kay 1066 2x1g unya mu plan unta ku add another 1066 2x1g crucial ballistix from another user pero lahi lng cya model. naniguro lng ku kay basi dili nya mg match.

[siegfreid]

bos unsa tanaw ninyo ani? sa review sa site, kani aku na aquire na ballistix should be pc8500. pero it shows only pc6400 or basi naa lng ku sayop. examine kuno mga bosing

[Der FüHRER]

ingana gyud na bro, wala man gud JEDEC rating na pc28500 1066mhz @ cas 5..so ang mahitabo is that ram makers bin their pc2 6400 cas 5 or pc2 8500 cas 6 (or was it cas 7) to run @ 1066mhz cas5 then sell it for a premium..actually kanang mga 1100mhz & 1150mhz na rams pc2 6400 chips ra gihapon na nga higher binned.

ok ra ba ang 4 sticks karon? you have to change the settings in the bios para mudagan og 1066 na..unless for those specific nforce chipsets na automatic na niya i-detect ang EPP settings. kanang mga naay EPP settings usually marked "SLI-ready" na sila..char2x kunuhay

[siegfreid]

790gx aku chipset. so currently at 800 pku running karon not 1066?

[Der FüHRER]

naa pa kay usbon sa bios ana bro, i'm not familiar with amd chipsets pero sa intel ang ram multiplier/ratio ang usbon. example sa e8500 333mhz:533mhz ang FSB para magdagan og 1066mhz at stock speed, and you also have to increase the voltage. 1.8v man na at default , increase to 2.1v and see if its stable..if not abot pa nag 2.2v

[siegfreid]

sa bios setup bos mao ni nka butang

mem CLK : 400mhz, 400mhz
Cas latency (Tcl) ; 5.0 , 5.0
RAS / CAS delay (Trcd) : 5 CLK , 5 CLK
Row Precharge Time (Trp) : 5 CLK , 5 CLK
Min Active Ras (Tras) : 18 CLK , 18 CLK
RAS / RAS delay (Trrd) : 3 CLK , 3 CLK
Row cycle (Trc) : 24 CLK, 24CLK

mao na ni 1066?