OC problem

[whoopz]

---

Good day,

patabang lang unta ko ani ako oc.

my specs are:
core2quad q9400
xigmatek dark knight
dfi lanparty p45 t2rs plus
ati hd5850
lancool dragonlord
wd caviar black 640
2x2gig team xtreem dark 1066 cas 6
gigabyte odin pro 550w


as of now gamit ko ug 443 multiplied by 8 multiplier resulting in 3.544ghz, voltage increased just one step higher than default. ok raman cya inside windows environment, ive done benchmarks and played games a little and ok ra cya.

ako lang nabantayan if gikan cold boot or whatever you call that kana bitaw naka unplug jud ang imo avr, magpalongpalong cya and sometimes dili makasulod sa windows. pero once maka sulod na, ok na cya, even if i turn off and turn on again, or even i-restart wala rajud problema. ako lang nalibgan is kung cold boot, usahay di cya kasulod. gibalik lang sa nako 400x8 = 3.2ghz as of now until i find a solution.


my ram indicates
CL 6-6-6-18 (1.8v - 2.0v)
does this mean that di ko dapat mulapaw ani nga voltage? by default naka set sa 1.9

[[-erick-]]

check daw whoopz kung naa option na masave nimo imoha oc settings.

kung "partial" fix sa imo prob before shutting down. revert to stock settings. tapos when coming from cold boot restore OC profile.

kay sa akoa r2e wala man prob with coldboot (sa akoa na encounter) maski 4.5ghz ang akoa OC.

nice rams akoa ddr2-800 kay 77712 lang kaya max oc to 1050mhz.

pwede na butang 2.0v volts (mine was 2.2v) ang rated sa Team Dark. (i overvolted it to 2.3v) pero for suicide runs lang. Dili jud recommended na mag-over volt ka unless gwapo kaayo imo mem cooler (used ocz, tt cooler, corsair) to keep it a little cool. Will watercool my mems later (kay abot na ug 40) kung 1.65v (88824) akoa gskills trident. (kung stock volt no OC around 25-30c) ang temps niya

[whoopz]

unsa pasabot nimo "partial" fix bro?

coming from cold boot bro ky ingani cya.... power lights on, stay like that for a little longer than normal, power lights off and on two times without reaching bios pa. dayun i have to sometimes turn off and on avr mga 2-3 times before cya maka abot ato "press f1 for abs and press del for setup". kung maka abot nako ana nga point sa "press f1 for abs and press del for setup", everything is normal na with no problems.

unsa imo cpu voltage bro? and nb voltage? hadlok mangud ko pakusog ug increase ani, ganahan rako ug safe increase. goal lang nako is to get at least 3.55ghz or 3.6ghz nga stable.

[[-erick-]]

ang partial fix ako pasabot kay try na before ka magshutdown for the night... revert to default settings sa bios.

tapos when you turn it on the next day; load your oc settings again.

maglisod ko ug hatag nimo ug nb volt kay lahi2x man gud ang timpla for every mobo+ cpu.

hapit na ko "dangerous volts" sa akoa i7 920 (1.59xx) to make it 4.6ghz

try daw + 2 steps imo nb volt +1 step sa cpu.

akoa rule of thumb as long as dili ka muabot sa 10c distance to tjmax that's safe for me to play.

sa NB atm dili pa ko mulampas 75c.

[yugi]

I think something is wrong during sa imong pag OC niya and or did you check or calculate your PSU if ma kaya ba niya imong system coz sa imo lang specs murag gamay ra ang 550W. Correct me if I am wrong doh mao langpud akong opinion.

[winkerrr]

bro pra nko mas maau dle lngka mag over clocking ky pra dle au bunog emo pc nya longterm pa emo pag use, pro kng nahan judka oc pwede raman pro temane lng nga dle au mo long last emong pc...

[[-erick-]]

I think something is wrong during sa imong pag OC niya and or did you check or calculate your PSU if ma kaya ba niya imong system coz sa imo lang specs murag gamay ra ang 550W. Correct me if I am wrong doh mao langpud akong opinion.

kaya man sa iya psu.

i OC'ed my i7 920 + gtx295 (400-450watts) lang gikaon sa akoa corsair 620w (but i decided to upgrade to corsair 1000w para dili kaayo bugbog ang 620w) so this will keep my corsair 1000w longer coz less than 50% lang load nya) putting your PSU to 85-95% load will degrade it much faster.

bro pra nko mas maau dle lngka mag over clocking ky pra dle au bunog emo pc nya longterm pa emo pag use, pro kng nahan judka oc pwede raman pro temane lng nga dle au mo long last emong pc...

as long as your keep your volts and temps in check its then its still fine.

[werty]

wew! overloaded man na imo PSU. d kadaug sa initial "kick"

have u tried testing each component(max CPU speed, FSB, mem@stock) kung pila ila maximum speed kaya and if they really nid that voltage increase to reach such speeds? sounds to me, wala initial test ni and deretso ra iya mga settings...

[Rainerius]

wew! overloaded man na imo PSU. d kadaug sa initial "kick"

have u tried testing each component(max CPU speed, FSB, mem@stock) kung pila ila maximum speed kaya and if they really nid that voltage increase to reach such speeds? sounds to me, wala initial test ni and deretso ra iya mga settings...

+1

Kana Q400 murag kusog2x sad na mo lala og wattage. Parisan pa sa HD 5850 og P45 board

[whoopz]

@werty ok ra ang mem bro, 1066 man iya kaya, wala nako gi overvolt ang memory dayun i make sure pud dili ko mulapaw sa 1066. if walay voltage increase mag blue screen naman sa 3.55ghz bro.

mas taas man power consumption ang i7 920 and gtx295 ni erick. pero cge lang ako ra obserbahan pag abot sa ako 750w corsair if mu persist ba gyapon ang problem. sa pagka karon, gibalik lang sa nako stock settings.