To all network master!

[JRanes]

---

is it possible if you have 3 routers connected on 1 hub then each of them has a computer that is connected with a wired network? Ang purpose sa 3 k routers is extension ra sa network gkan sa hub. Then isa nila lain2 og ip address like 192.168.1.1 , 192.168.2.1 , 192.168.3.1. mgka meet bkaha ang tnan pc ani? f not..saon mn ni pra mg kita cla sa network? unsay sakto nga address gmiton? pls! need help here!..Thanks au ninyo..!

[dammy]

you can attach multiple router in your network but only one dhcp server should be running and for the gateway you can assign each router for multiple ISP. but still you can run dhcp server on each router providing and ip range address for one isp for the entire network. just remember that GATEWAY ip address is for internet connection, wrong configuration lead to no internet connectivity.

[netcommando]

mo-work na basta correct ang pag-config sa imo network, btw use switch instead of hub...

[JRanes]

you can attach multiple router in your network but only one dhcp server should be running and for the gateway you can assign each router for multiple ISP. but still you can run dhcp server on each router providing and ip range address for one isp for the entire network. just remember that GATEWAY ip address is for internet connection, wrong configuration lead to no internet connectivity.

ahm..where can we know if we are using one dhcp server? naa rbna sa router settings? aq g check ang isa nq k router nk set og "use router as dhcp server" under LAN setup. aq e clear og balik ha..mk kita diay ghapon ang tanan pc nga ga connect sa kada router og sa hub bsan og lahi2 og ip address? mkita ghapon sa network places?

[JRanes]

mo-work na basta correct ang pag-config sa imo network, btw use switch instead of hub...

D-Link DES-10240, 10-100 Fast Ethernet Switch mn ni cya.

[aozora]

unsay purpose nga i.router ang each pcs going to hub? huhuhu... wla ko kasabot sa gamit.

[dammy]

ahm..where can we know if we are using one dhcp server? naa rbna sa router settings? aq g check ang isa nq k router nk set og "use router as dhcp server" under LAN setup. aq e clear og balik ha..mk kita diay ghapon ang tanan pc nga ga connect sa kada router og sa hub bsan og lahi2 og ip address? mkita ghapon sa network places?

so meaning you want to assign a router specific set of pc's in your network and one isp for the entire network. that would be possible.

run dhcp server on each router then, attach them from your modem to the first router WAN port, switch port to 2nd wan port router and the 3rd from switch port to wan port and so on..

the 2nd router upto how many router you attach then assign them as static ip not automatic. assign also the first router an ip for the specific router ip mac address attach. para dili mag libug ang first router.

all cabling must be straight through para dili mo init ang router ug dali.

[JRanes]

unsay purpose nga i.router ang each pcs going to hub? huhuhu... wla ko kasabot sa gamit.

my purpose ani is.pra magamit cja as "extension" instead nga switch hub aq ggamit is wireless router. the main problem nq is dli nq cla ma network pero mk access cla tnan og net.

[JRanes]

Ani nlng mga br0 pra mklaro..db f mo buy ka og wireless router naa na default ip like 192.168.1.1 kron f naa k "lain" or new router nga same rpd og ip db ato nlng e change kay mg conflict. am i ryt? now f ato na e change ang usa k router sa iyang ip address mg k kita pba kha cla sa network? ang mga pc nga nk connect sa ila mk view b sa entire network? pc's from router 1 and pc's from router2? unsa0n kha ni?? please give some info! Thanks!

[netcommando]

D-Link DES-10240, 10-100 Fast Ethernet Switch mn ni cya.

ah ok, so it's not hub, it's a switch... hubs and switches are different devices in the network