Can't Reformat

[ranaticsrule]

---

Good PM Y'all, Need Help on my problem.

Naay Running PC w/ OS and softwares then ako gi reformat.

- Dili maka boot ang OS CD... mo freeze sa Boot on CD... (IDE CD-Rom)
- Gi ilisan ug brandnew SATA DVD re-writer
- After boot up, mo prompt nga non-RAID Device ang DVD-rewriter
- so i check my bios and set SATA to IDE instead of RAID
- naka boot na ang DVD ug ang OS
-Then mo freeze kutob ra sa setup is loading files (Windows Executive)
then di na jud mo lahos
-try nako gamit ug lain lain nga CD (genuine xp home, genuine xp pro, re-copy from genuine cd, pirated,)
-mo freeze ra ghapon nig abot sa setup is loading files (Windows Executive)
then di na jud mo lahos

-then sa cge nako reset reset sa PC, di na nuon ko ka sod sa BIOS, naay prompt nga bios rom checksum error detecting floppy drive a media


-try na nako re-seat ang RAM pero wala gihapon
-try na nako tang-tang ang cmos batt pero wala gihapon
-Load BIOS Defaults pero wala gihapon


New Problem Occured after attempting to reformat -->> https://www.istorya.net/forums/comput...sum-error.html













-------------------------------------

[StingerRay]

Maybe the problem is your harddisk. Try installing OS with another harddisk and see what happens.

[rbrallos]

sa imo na CD Installer bro, dapat naay Sata driver imo Windows-XP Installer

[ranaticsrule]

Maybe the problem is your harddisk. Try installing OS with another harddisk and see what happens.

Ok man ang hard disk. Running man jud ni siya w/ os and softwares pero ako lang e reformat

[ranaticsrule]

sa imo na CD Installer bro, dapat naay Sata driver imo Windows-XP Installer

Nagamit na man ni nako ako mga CD sa mga board nga naay sata then work man... naa na man cguro sata driver ang XP nga CD

[dartzed]

i think you have system/hardware instability issue.. something is wrong with the clock timing on proc or RAM or maybe the ide/sata controller sa hdd.. usually sa kadugay ni ug gamit mulessen ang accuracy sa device the more it is used can cause system instability..

try using other ide/sata cable daw if d muwork try changing it to the other slots you might as well do it on the RAM sad ibalhin lain slot..

[ranaticsrule]

i think you have system/hardware instability issue.. something is wrong with the clock timing on proc or RAM or maybe the ide/sata controller sa hdd.. usually sa kadugay ni ug gamit mulessen ang accuracy sa device the more it is used can cause system instability..

try using other ide/sata cable daw if d muwork try changing it to the other slots you might as well do it on the RAM sad ibalhin lain slot..

Thanks a lot for the reply.. I'll try it when i get home then I'll post the feedback

[limes]

sakto si dartzed usually applicable ni sila sa memory, hdd, gpu pinaka grabi sa processor.

@ts bro try change your HDD see what happens also ang cord niya ilisi and try balhin sa imo slots sa hdd.

[jntio]

nka sugat ko ani na probz, ako g buhat ky g test drive usa nko g reformat. try lng dw

[ranaticsrule]

nka sugat ko ani na probz, ako g buhat ky g test drive usa nko g reformat. try lng dw

What do u mean by test drive bro?