My Core 2 Quad temp.

[clevin]

---

Mga bro, normal rba ni na dli pareha ang temp sa core sa ako processor bsag idle?



BTW, mau njd na kina ubsan na temp sa core 2 and core 3.

PLEASE! RESPECT MY THREAD AS I RESPECT YOURS. THANK YOU!

[centax error]

stock HSF na or aftrmarket coolers? re seat ang heatsink and re apply thermal paste generously if necessary...suggest you use coretemp (test sensors) and HWmonitor to monitor temps and post again.

[dexlimp]

murag stock heatsink cgro na boss considering the fan RPM

[clevin]

murag stock heatsink cgro na boss considering the fan RPM

dli ni xa stock mga bossing. I'm currently using Xigmatek HDT s963.

[clevin]

stock HSF na or aftrmarket coolers? re seat ang heatsink and re apply thermal paste generously if necessary...suggest you use coretemp (test sensors) and HWmonitor to monitor temps and post again.

ako na g re seat ang heatsink bro pero mau ra jpn.

[poldopunk]

stock ni nga fan sa xigmatek? 2000RPM raman ang max RPM sa xigmatek nga fan....

[clevin]

stock ni nga fan sa xigmatek? 2000RPM raman ang max RPM sa xigmatek nga fan....

uu bro. stock pa. nangita pmn sd gud ko ug kusog2x nga 92mm nga fan.

[poldopunk]

ah, S93 man diay, abi nako S1283. anyway, pila'y ambient temps nimo? magbase man gud ni ang temperature sa ambient temperature, without out, wala kwenta kay wala basehan.

[limes]

pila room temp nimo bro? and post results using hwmonitor or kanang mga mas masaligan jud.

[centax error]

ambient temperature has nothing to do with 3-4 degrees off between the cores... re-seating the heatsink and even application of good thermal paste plus equal pressure on the 4 bolts for the retention bracket will remedy this. 4 degrees off is huge difference especially when you're oc'ing. Also consider using crossbow.