Bro,
ask lang ko.. gamit nako stock HSF lang pero grabe man mo.init ang processor... sauna gamit ko ug E2140 dli man to kaabot ug 50C pero karon mo abot man ug 65C...
Results 1 to 10 of 32
Thread: CPU Temp at 65C
-
06-07-2009, 01:28 PM #1C.I.A.
- Join Date
- May 2003
- Gender
- Posts
- 2,047
CPU Temp at 65C
-
06-07-2009, 01:32 PM #2
whats your new procie bro?
-
06-07-2009, 01:36 PM #3C.I.A.
- Join Date
- May 2003
- Gender
- Posts
- 2,047
kalimot ko ug butang... E6600...
Originally Posted by COMCAM
-
06-07-2009, 01:41 PM #4C.I.A.
- Join Date
- Jan 2005
- Gender
- Posts
- 3,553
pag-ilis nimo ug proc nag re-apply ka ug thermal paste or gi-recycle ra nimo ang existing paste?
-
06-07-2009, 01:47 PM #5C.I.A.
- Join Date
- May 2003
- Gender
- Posts
- 2,047
gubutangan nako bag-o bro... tx2 man guro to... then ako jud gi check na sakto jud pagkabutang ang hsf... Originally Posted by poldopunk
-
06-07-2009, 01:50 PM #6C.I.A.
- Join Date
- Jan 2005
- Gender
- Posts
- 3,553
between E2140 and E6600, E6600 is faster and is running at a faster frequency which may be the reason why temps are high.
-
06-07-2009, 01:59 PM #7C.I.A.
- Join Date
- May 2003
- Gender
- Posts
- 2,047
so ok ra abot sya mga 65c?
-
06-07-2009, 03:20 PM #8
taasan ra gehapon ko, I can remember my Pentium D before that ran along the 60 degrees mark. Check again your HSF basin naa pin na wala na hugot.
Also check fan, was it connected to the cpu fan pins and not to other 3 pin or 4 pin? check fan speed as well.
-
06-07-2009, 03:24 PM #9C.I.A.
- Join Date
- Jan 2005
- Gender
- Posts
- 3,553
there shouldn't be any problems with your temp but its always better to get low temperature.
"a cool processor is a happy processor"
-
06-07-2009, 03:31 PM #10Elite Member
- Join Date
- Aug 2008
- Posts
- 1,222
OT:
@epoyking
asa ra man imong e2140 bro? dli nimo baligya? hehehe.. ari to kay atong esugba, atong e OC.. 
Reply With Quote
Advertisement
Similar Threads |
|
Posting Permissions
|