Msi p45 neo2

[kabz]

---

mga bro ako gi oc ang akong rig ba ako gi slight oc lang from 26. to 3.0
core volt nako ako gamit 1.33 but sa system kay 1.36 running na ni 12hours
walay stress using orthos beta but ako mems imbis 1066 ako ra gi transmit to 900 plus
lang kay mag lisud ko sa voltage ani need your advice maski ma run lang nako 1066
suway2x rani nako og oc para kat-on pud tag gamay bah....

unsa pa kaha ako i change ani sir?

current setup:
MSI P45 neo-2 Crossfire ready
Intel Quad core 9400
Team Xtreem Dark 1066 4gig
600 watss psu Silverstone
1 Gig palit HD4870 dual fan edition
BIOS VER 3.4

pics:










link to view:
http://i283.photobucket.com/albums/kk306/kabz1973/cpuz.jpg
http://i283.photobucket.com/albums/kk306/kabz1973/temp.jpg
http://i283.photobucket.com/albums/kk306/kabz1973/systeminfo.jpg
http://i283.photobucket.com/albums/kk306/kabz1973/full2.jpg
http://i283.photobucket.com/albums/kk306/kabz1973/GPUZ.jpg
http://i283.photobucket.com/albums/kk306/kabz1973/FULL.jpg

[reishoto]

bro, dili gyud nako maklaro ang imo detalye, hehehe..

[kabz]

kani bro na link: ako ra gilubag og 3.0 ni dagan raman pud need lang pud ko inyo advice...
like pila ni ka days i observe kung stable ba jud....

[yugi]

amigo kong kabz...imong resolution gamay pag save nimo....unsaon nato pagklaro heheheh...

balika ug save or printscreen para ma klaro k!

[reishoto]

oi, mao na ako pasabot bro, hehehe/...

[kabz]

posted pics na bro @reishoto

[kabz]

update gi change nako to 1.25 akong cpu voltage kay sa 45 n mao naman maximum daw then sa 65n kay 1.35 cpu voltage ambot if sakto ba ko ani........

Summary: mao ni ako na search
This has been an outstanding processor. It overclocked to 3.2 GHz straight out of the box with no increase in voltage. The processing power of four cores is amazing when an application actually takes advantage of it. The huge 12 MB cache on this processor really helps speed some of that up as well.I highly recommend an aftermarket cooler for this processor. It isn't that the included cooler is bad, but it certainly wasn't good. It was kind of noisy and doesn't keep the processor very cool under prolonged periods of heavy use.All in all, I would highly recommend this processor to anyone looking for a good quad core processor.

Section 12: Overclocking

Intel's Thermal Design Power (TDP) spec can be exceeded by over 50% when CPU frequency is aggressively overclocked, and Vcore is increased to maintain stability. When the default Vcore spec (on the retail box) is increased by just 10%, it becomes difficult to maintain Safe Scale with high-end cooling. As Ambient temperature increases, Vcore and overclock may need to be decreased.

Every processor is unique in it's overclock potential, voltage tolerance, and thermal behavior. If the maximum stable overclock is known at 1.35 Vcore (65nm) or 1.225 Vcore (45nm), then ~ 300 Mhz of additional overclock remains until Safe Scale is exeeded due to increased Vcore. Each increase of 0.05 volts will typically allow a stable increase of ~ 100 Mhz, and will result in a corresponding increase in CPU and Core temperatures of 3 to 4c.

At 1.5 Vcore Max (65nm) or 1.3625 Vcore Max (45nm) with 100% Workload and 22c Ambient, highly effective CPU cooling and computer case cooling are required to maintain Safe Scale and stability. Ambient and Vcore are the most dominant Variables affecting temperatures.

nahan ta ko 1066

[kabz]

murag okay naman guro ni ako nalang prob kay deli nako magamnnit ang 1066 sa akong mems 1066 nalang unsaon kaha ni nako sa do i need to increase voltage sa akong ram.....

[dmelsie]

bosing kabz ok na ng 1000 mhz ram speed oi
e try pa daw push gamay imo oc ana hehehehe basig mas ok pa noon kaya tingale ang 3.2 ana imo proc oi

[EarlZ]

Master Kabz, why not shoot for 400FSB para 3.2Ghz atleast.. Q9400's can do 3.6-4.0 that easy.