Sata Controller IDE and AHCI

[poymode]

---

Question...

Naa ko laptop ga dual boot ug XP and VISTA....

If mag XP ko, need nako I set ang sata controller to IDE mode sa bios kay if AHCI siya, mu blue screen.

If mag vista sad ko, other way around, I have to set my sata controller to AHCI mode sa bios kay if IDE mode xa, mu blue screen sad.

Naa ni work around para d kaayu hasol?

[EarlZ]

I dont know any easy fix for that, but what i would do is set the mode to IDE mode ( no performance difference ) and reinstall the said OS or both in IDE mode.

[poldopunk]

Question...

Naa ko laptop ga dual boot ug XP and VISTA....

If mag XP ko, need nako I set ang sata controller to IDE mode sa bios kay if AHCI siya, mu blue screen.

If mag vista sad ko, other way around, I have to set my sata controller to AHCI mode sa bios kay if IDE mode xa, mu blue screen sad.

Naa ni work around para d kaayu hasol?

install the SATA driver for your XP.

[Nee0]

try checking sa mobo site.. tingali naay upgrade sa imo mobo bios also get the latest drivers onsite

[Envy 64Ht]

Another thing to do is slipstream AHCI drivers to your XP disc.
So u can just boot with Vista or XP without changing sata modes.

Downside is, u may have to re format your XP installation. Coz if you had installed
XP using IDE mode, installing AHCI drivers in XP won't solve your problem.

[nirdle_phogi]

ask lang ko bro, gi-lain-lain nimo ug drives pag install bro? ang XP sa IDE, nya Vista sa SATA??

[handsoff241]

driver for you xp put sata driver in it.

[poymode]

ask lang ko bro, gi-lain-lain nimo ug drives pag install bro? ang XP sa IDE, nya Vista sa SATA??

Usa ra ka HDD..hehe

Lahi lang nga partition. Pag install gud nako sa XP, sa install screen mu bluescreen siya if d ko mag IDE mode.mao to na IDE mode jud akong XP.

Ma load man guro nako ang AHCI drivers inig install sa XP..dba naa mana kanang F6?

EDIT..

Gisuwayan nako F6, mangita man ug floppy akong laptop..nya wa may floppy akong laptop..hahaha

[Envy 64Ht]

As i said bro. slipstream AHCI drivers in your XP installation disc. mo deritsu rana detect sa imo hdd
na naka AHCI mode.

[poldopunk]

^ he's right. slipstreaming the drivers for Windows XP. Follow the links posted here.

Slipstream(for lack of better term) Intel AHCI SATA drivers into WinXP boot disk - HardwareCentral Forums

After that, you need to reinstall Windows XP. Now, if you get bluescreens the minute you enabled AHCI on your harddrive with Windows Vista, follow the fix below:

Error message when you start a Windows Vista-based computer after you change the SATA mode of the boot drive: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE"