Internet Connection Sharing

[Hot Ice]

---

Hi, nalimot naman ko sa subject atong topic about ani. Was wondering kung unsaon pag setup sa internet connection sharing aning 2 ka pc.

PC1 (2 lan cards):
LAN1 (connected to ISP):
LAN2:

PC2 (1 lan card)
LAN3:

Unsaon nako pag setup nga ang pc2 maka connect pud sa internet? was thinking nga ako connect ang LAN2 og LAN3, but unsa man pag setup. I mean, unsa gamiton nako IP address sa LAN 2 og LAN3?

[dexfranco]

if your dsl modem is usb based you only need one lan card to connect the internet feed comes from your dsl modem usb type and your first computer COMP1 becomes your ICS (Internet Connection Sharing server) to COMP2 or more comps. if your using windows xp just look inside your settings->control panel and look for anything to do with ICS its usually inside the networking icon sorry if i'm too vague since my specialty is linux not windows networking.

[cloud]

Usually you will need a hub but you can also use a crossover utp cable cat5 to network 2 pc's only.
The IP address is 192.168.XXX.XXX and your LAN2 should have an IP address of 192.168.0.1 since it will be the gateway for your internal LAN. Also use the same workgroup for all your internal pc's in the LAN.

Hope this help.

c l o u d

[alecohr]

Usually you will need a hub but you can also use a crossover utp cable cat5 to network 2 pc's only.

question lang. if mag crossover connection, ma divide ba ang speed?

[Wayth Vader]

naa koy pangutana sa katong nakagamit ug broadband router, my bandwidth is @ 256kbps and naa ko plan to connect 2 PC and 1 Notebook, madivide ba ang bandwidth speed/3... attn internet cafe owners who use broadband router, does it share bandwidth in each PC use

[Hot Ice]

LAN1 using RJ45 naka connect ako internet mga bro..
In this case, unsa man ako assign nga IP sa LAN2?
Then sa LAN3 (sa PC2) unsa man pud iya mga IP settings?

[cloud]

unsa man na OS imo gamit?

[Hot Ice]

Windows XP Pro..

[sikput]

Tabang ko UP kay I have exactly the same problem.

[bardnekom]

@hot ice

since LAN2 AND LAN3 will be your local network you can use the following settings below:


for lan2:
IP Address: 192.168.0.1
subnet mask: 255.255.255.0
default gateway: nothing.

preferred dns server: you can use the dns of your lan1
alternate dns serve: you can use the dns of your lan1


for lan3 (pc 2):
IP Address: 192.168.0.2
subnet mask: 255.255.255.0
default gateway: 192.168.0.1

preferred dns server: you can use the dns of your lan1
alternate dns serve: you can use the dns of your lan1


hope this will work....good luck...