Battery Option Limited Flame Charger (for airsoft and RC)
* High Speed sample rate negative delta voltage and zero delta voltage auto-detect cut off circut with MOSFET control for peak detection. Pulsation charge method to prevent overcharge and overheat.
* Charge Ni-MH battery by aero delta voltage technogy without using thermo-detection probe.
* Auto-detect switching mode charge for Ni-CD and Ni-MH battery.
* Front panel with MODE buttons and dial to switch between Charge, Discharge, 1 Cycle and 3 Cycle
* Dial to switch between charge current ( 0.5A - 7A )
* 7 LEDs indicator for charge current
* 5 LEDs indicator for charging modes
* 1 superbright LED indicator for Power
* 8-bits 8MHz CPU with 8KB ROM, 1KB RAM, 8 channel 10-bit ADC and 8-bit PWM current control.
* Auto-detect the number of cells of the battery
* Reverse polarity protection system
* Charge battery pack with 1-8 cells
* Auto detect system for power input 110-220V AC or 12V DC
* Build in 5A discharge device for single or cycling discharge
* 6 cm Cooling fan to enhance the performance
Input Voltage AC 110V - 240V
DC 10.0V - 16.0V
Battery Voltage Range 1.2V to 9.6V
Number of Cells 1 ~ 8 Cells
Charging Current 0.5A to 7.0A
Discharging Current 5A
Cut-Off Voltage 0.9V per cells
Charging Capability 10 ~ 9999mAh
Charging Mode Slow, Fast, 1 Cycle & 3 Cycles
Trickle Charge Rate 0.1A
Voltage Freshold 4mV
Cooling Fan Bearing 6cm
Bought this for 2.5k when I was still into Airsoft. Used around 5 times, then lost in some cabinet in the house... found it again when we moved... lol
The item is in perfect condition, in original box, inclusive of manual and cables.
Selling for 2,000 pesos.
message me at 09173206658