unreachable host

**hybrid_X** · 02-26-2006, 06:41 PM

when i ping my ip -192.10.10.199 at the same pc it says unreachable host. any idea whats going on? i have a built-in LAN and properly installed the driver but could that be possible? what should i do?

**Tamblot** · 02-26-2006, 11:22 PM

Review your IP settings - IP Addess, Net Mask, Gateway.

**hybrid_X** · 02-27-2006, 08:48 AM

review ip settings?

**Tamblot** · 02-27-2006, 12:05 PM

yep. It might be possible that you still need to configure your TCP/IP Settings.

c:\ipconfig /all

What does it give you?

**kilmike** · 02-27-2006, 02:25 PM

Are u sure u ping the right IP? Try Ping IP Loop back daw.. (ping 127.0.0.1) if ever unreachable ghapon its ur NIC adapter.. basin conflict with resource (I/O, DMA, IRQ) or curropted ang driver.. try to unistall the drivers n install a new copy..

n if u can ping using loopback IP try Tamblot advice.

**hybrid_X** · 02-28-2006, 08:50 PM

Tambot: it does not return anything the just window close.

**hybrid_X** · 02-28-2006, 08:53 PM

127.0.0.1 works fine and return a consistent time<1m...

**kilmike** · 02-28-2006, 09:25 PM

Originally Posted by hybrid_X

127.0.0.1 works fine and return a consistent time<1m...

so theres no problem with ur NIC.. if u can ping using IP loopback "ping 127.0.0.1" then im sure u can ping ur own IP. be sure u ping the correct IP address of ur PC.

try this command, put this at ur run text box : "cmd /k ipconfig"

im sure u get the correct IP address

**Tamblot** · 03-01-2006, 08:32 AM

check under your Local Area Connection Properties if there is an Internet Protocol (TCP/IP) installed.

**kilmike** · 03-01-2006, 02:51 PM

Originally Posted by Tamblot

check under your Local Area Connection Properties if there is an Internet Protocol (TCP/IP) installed.

Im sure he has TCP/IP installed since he can ping using IP Loopback.

Thread: unreachable host

Thread Tools

Search Thread