DSL or Brodband Configuration

[dontknowmewho]

---

good day, unsaon pag configure ang DSL or Broadband nga maka internet ta? with 3 computers!thanks

[Tamblot]

Set the ip address of the 3 computers. set the dsl router/modem as the gateway. Set the DNS servers given by your ISP and off you go!

Read!!

[Rcon]

i think the modem that the ISP gave u is a router type. all u need is a switch with minimum ports, put the patch cord of the modem to the switch and all patch cord of the PC to switch, then test ur PC if it obtain an IP address of 10.0.0.x. to do it is just go to command promt then type ipconfig /all then enter. If the ip address is 10.0.0.x where x is range from 1 t 10, then ur PCs can now connect to the internet. No need for router its very costly.

[dontknowmewho]

thanks kaayo mga bro!

[primejohnz]

if you are using another DSL modem other than the one given by your ISP then you have to get the Virtual Circuit Identifier (vci) value and the Virtual Path Identifier (vpi) value, the handshake protocol and the Point to Point Protocol type (ppp)

i can make an auto installation software for your modem. all you have to do is enter your username and password and everything is done automatically.