Need inputs on this

[bukog]

---

Background:

Ive ordered 4 pc's sa Cebu.. When it arrived sa amoa, we tested it and found that 3 units are not functioning well (Seagate 160G sata will not auto detect sa mobo-Redfox AMD690G). So we send it back sa Cebu for check-up, sending mobo, HD, and AMD proc without the heat sink to save sa shipment. When it arrived sa Cebu via LBC, the store told us na ang pins sa processor k na bend na because it was not on its place.

Ask lang ko sa inyo opinion.

dali ra diay na ma remove ang AMD na processor sa mobo if wala na iya heat sink?

thanks pips..

[blade4638]

imho, possible if the lever which locks the proc in place sa iyang socket was somehow lifted (because it was not properly locked in place). otherwise, no, the processor will not come off easily with the lever locked in place.

btw, what store did you purchase this from?

[gabs]

bro namutbot ra to sila para likay sa blame. dako kaau to ilad.

if ever gani tinuod nga na bend, its their fault coz sila may ga assemble.

di na sya ma move coz lahi ra ug separate ang lock sa heatsink ug processor. gawas cguro imo gitangtang ang processor sa iya place then wala u natarong ug balik, naay possibility na ma bend.

tell us daw what store.

[bukog]

Dli nalang ko mo mention if unsa na store bro.. sorry just to be fair sa ila at this point in time..

It is here in Storya.net na store ra pud. I am from Mindanao paman gud mao when I bought and recv the units, only one of these units were functioning well. SO, they advised me to return only the motherboard, proc and hard disk to save on shipping.

The tech support nila k ning claim daun na when he opened the box, the proc was already not in its place and that ang pins k na bend daw. Syempre d man pud kau ta mau aning pc parts thats y ning ask kos opinion dri sa mga tga Istorya.net.

Thank you sa inyong answer bro. now I know.. :mrgreen:

[etgo]

dako dako mani emung problema bro.. kung ganahan ka e mention nalang asa nimu ni gi palit, basing naa pay maka tabang nimu diri..

[bukog]

@blade4638 : insakto ka bro. I've tested it myself last wikend.. remove the heatsink.. and theres a lever which i think locks the proc in place. After removal sa heat sink, akng i uyog2x gyud but to no avail, wla gyud na tang2x ang proc. so i guess impossible gyud na ma remove if dli ma hilabtan ang lever.

[cosplay]

bro namutbot ra to sila para likay sa blame. dako kaau to ilad.

if ever gani tinuod nga na bend, its their fault coz sila may ga assemble.

di na sya ma move coz lahi ra ug separate ang lock sa heatsink ug processor. gawas cguro imo gitangtang ang processor sa iya place then wala u natarong ug balik, naay possibility na ma bend.

tell us daw what store.

Yup.

[isyot_daut]

mention da store....