best mobo and mem for athlon64 x2 3800+

[speedphreak_x]

---

mangutana lang ko, unsa may nindot na board para athlon64 x2 3800+? gipadad-an man ko sa akong cousin. plan man nako na ibaligya ni, uban sa akong amigo na athlon64 x2 4400+. gikan man ni sa ohio. ug ang akong amigo, plan na pud mu-assemble na lang.

unsa kahay maayo na board para sa inganing cpu? kanang available locally.

[nitto1320i]

well, since you also have someone from us who can send you through DHL,UPS or FedEx, then mas maayo if didto nalang ka order since it cost less than getting it here which has a markup of 30~50%. for your setup i would suggest these to pair with your Athlon64 X2 3800+

Mobo:
-DFI Lanparty UT NF4 SLI-DR Expert
-DFI LANPARTY nF4 SLI-DR
-DFI LANPARTY UT nF4 SLI-DR
-DFI LP UT nF4 SLI-D

(www.dfi-streets.com for more info which one fits your needs)

Suggested Rams: (Recommended by DFI)
-OCZ EL DDR PC-3200 Platinum [2x1GB] (TCB3/TCCD) [2-3-2-5 1T] (tightest timing you could ever get for a 2gig kit)
Model: OCZ4002048ELDCPE-K

-Mushkin eXtreme Performance XP4400 [2x512MB] (TCCD) [2.5-4-4-8] (known to work well with DFI mobo's with
high enough headroom for overclocking..)
Part number: 991400

-Mushkin XP4000 REDLINE [2x1GB] (Infineon CE-6) [3-3-2-8]

-G.Skill F1-3200PHU2-2GBZX [2x1GB] (Infineon CE-6) [2-3-2-5]
Part number: F1-3200PHU2-2GBZX

-Patriot PC4800 [2x512MB] (TCCD) [2.5-4-4-8]
Part number: PDC1G4800+XBLK

-Patriot PC3200 [2x512MB] (TCCD) [2-2-2-5]
Part number: PDC1G3200+XBLK

-Crucial BallistiX PC4000 [2x512MB] (5B-G) [3-4-4-8]


Then get a pair of WD Raptors and Raid 0 them..

Tip: if somehow youre getting this mobo. stay away from those Corsair Junk series eheheh.. i mean Corsair XMS series since they got alot of issue with this ram specially with their JEDEC chip UCCC.
also avoid value rams for this mobo, they just dont like each other much..

[dagget]

get the motherboard also sa US.....

They have the best price there...

DFI Lanparty the best

or Asus or Abit pud....

just wait

I saw a DFI Lan party peddled here just search the consumer electronics section...

it was a good deal

[nitto1320i]

aw naa koy nakalimtan.. kung magpadala ka bro. maayo ang DHL kay dili mu inspection ang Customs.. basta ipa declare lang didto na the item cost for your package is around $100. they wont bother peeking through your stuff. unlike fedex. they only hold items on customs when you declare your package item cost $500.00 above. hope this helps. :mrgreen:

[speedphreak_x]

salamat kaau sa nagkadaghan nga response, helpful kaau mo. :mrgreen:

cge, suwayan nako kung ma-da pa na mupalit tong akong cousin kay mosud naman cya sa military school sa kentucky. ug dili na, diri na lang ko palit.

kadtong sa akong friend, istorya member pud, gikan to malaysia. in peso, P7500 ra ang worth. sealed shut man ang box at authentic AMD. dili pa lagi gi-ablihan kay basin mu-desider na ibaligya.

[jordinho]

may i suggest epox 9npa+ sli and Patriot PC4800 [2x512MB] (TCCD) [2.5-4-4-8]
Part number: PDC1G4800+XBLK

got both. currently running em @305*9 stable as can be(24 hours prime95 with 3dmark03 loops@ background). (out of teh box 300*8, minor voltage adjustments bumped it up to 305*9)

[EarlZ]

grabi ka hangin

@jordinho;
unsa imong CPU gamit ?

[DD]

hhmmmm...im using the DFI SLI-D and corsasirs XMStwinx 3200XL and dont have any problems running them.

[jordinho]

@EarlZ 3000+ venice lang part.

[EarlZ]

lamia ana imong venice oi mo abot 305FSB, i think morag sa motherboard ko na limit sa akong FSB, kay maski 166 ra nga mem divider akong gi gamit i cant get past 225Mhz fsb sa akong asrock, currently using a 3700+ nga sandiego, mo change rako to epox nga nf4 when i get an pcie videocard.