Kinsay expert diha ug PC Troubleshooting... HELP naman

[jestrada12000]

---

I have a P4 2.6Ghz PC. Ang problema karon is,

- if ma ON ug 30mins or more ang CPU mokalit lng ug hang.

- inig reset nko kay naay error mesage nga "oveclocking failed...etc".. wla man ni nako gi overclock, the processor itself is 2.6Ghz. so musolod ko balik sa BIOS setup, iset nako balik to STANDARD ang setting then SAVE nko.

- inig reboot na.. dili na makastart... magcge nlng blink ang monitor...no activity sa HDD.. papahulayan nko ug 1hr.. mo OK napud.

- i tried underclocking to 2.4Ghz.. but stil the same. mo hang gihapon den inig reboot nko.. mobalik napud ang setting to 2.6Ghz

- i've noticed also nga inig maabtan na ug 20-30 mins.. i can feel nga mo start na ug kurog ang casing sa CPU..

what do u think is the problem here.

[victorvic]

As your per statement that you underclock from 2.6 to 2.4 means you did something with your mobo. Overclocking or Underclocking could damage the mobo.

[victorvic]

Try to check the proc fan.

[cloud]

I have a P4 2.6Ghz PC. Ang problema karon is,

- if ma ON ug 30mins or more ang CPU mokalit lng ug hang.

- inig reset nko kay naay error mesage nga "oveclocking failed...etc".. wla man ni nako gi overclock, the processor itself is 2.6Ghz. so musolod ko balik sa BIOS setup, iset nako balik to STANDARD ang setting then SAVE nko.

- inig reboot na.. dili na makastart... magcge nlng blink ang monitor...no activity sa HDD.. papahulayan nko ug 1hr.. mo OK napud.

- i tried underclocking to 2.4Ghz.. but stil the same. mo hang gihapon den inig reboot nko.. mobalik napud ang setting to 2.6Ghz

- i've noticed also nga inig maabtan na ug 20-30 mins.. i can feel nga mo start na ug kurog ang casing sa CPU..

what do u think is the problem here.

mo shutdown na siya kay ni overheat na mao sad na dili dayon siya mo gana kay init pa ang cpu ana.
can you post your specs. basin sad og weak imo battery sa CMOS dili niya ma save imo settings.

[IT]

@ j.estrada try change to DEFAULT settings of your BIOS.

[mE_bytes]

i guess, mao na m.kurog imu fan ka'e kusog na m.2yok ang fan nimo.. so',, in that case.. init na kaau imu processor.. and mao m.hang na xa.. try looking at the hsf if it's properly seated in the processor..

[mE_bytes]

use the optimal/default settings in your bios too..

[bowlingball]

check ur power supply sad

[butitoy]

must be ur fan..its very dusty i believe..clean it.

remove the heatsink. clean it. clean the thermal paste residue with GAAS ( kerosene ).

wipe the proc paste residue witha cotton buds dipped on a kerosene.. clean thoroughly.

theres a part of the proc thats a hole..do not fill it.
put new thermal paste.( arctech silver 5 or better )

put heatsink again. see that it is properly seated in its socket.firmly locked..

..and put some extra auxillary fans..

ventilate ur pc.

and yeah.. check for swollen capacitor on ur mobo..on ur videocard.

and on ur psu.


if it persist..post ur observation here.

[detour]

try to reset the bios..or remove the battery then put it again..