...successfully unlocked otb 1.1.2, 4.6 bootloader w 04.02.13_G baseband.

[jaytol23]

---

just unlocked my friend's(roy_nitro) iphone otb 1.1.2 w 4.6 bootloader w 04.02.13_G baseband!...

@ bos coffee in ayala et center...

:mrgreen:

[ajol]

you try x-sim

[jaytol23]

you try x-sim

kay kana gamit x-sim, turbo sim, stealth sim...dli mana unlocked!...

wla ko gamit ana.....

[jaytol23]

up...

kinsa diha gus2 pa unlocked sa ila iphone otb w 4.6 bootloader?!...

kol me @ 09179189777..

[comicGeek]

bai congrats. Bilib ko nimo naka buhat ka sa di mabuhat. Hehehe

[saosin_demo]

mubarato na jud iphone prices run. hehehehe

[lot_sol]

dli imposible bro...ma unlock na jud ingon si roy_nitro, wala gud cya katuo pagbalik nya kay unlock na!...

ingon pa jud ni roy_nitro nga wa pa bayad si jaytol23 a2 kay migo mana cla, pero pag tan-aw nya naa man si signal sa "smart" iyang iphone...cya na nuon mugos nga mobayad cya sa iyang kalipay!...ang kang jaytol23 a2 kay opportunity lang nga cya first sa istorya nga maka unlock ug iphone otb 1.1.2 w 4.6 bootloader.




[br]Posted on: February 10, 2008, 12:37:59 AM_________________________________________________

bai congrats. Bilib ko nimo naka buhat ka sa di mabuhat. Hehehe

hehehe.

[saosin_demo]

working jud daw btaw. naa koy mga kaila na naay otb 1.1.3 ug 1.1.2. na unlock na jud daw nla.

[lot_sol]

working jud daw btaw. naa koy mga kaila na naay otb 1.1.3 ug 1.1.2. na unlock na jud daw nla.

mao jud!...

[janhenz]

If your OTB 1.1.2 or 1.1.3 is still NOT JAILBROKEN Proceed to Step 1.

If your OTB 1.1.2 or 1.1.3 is already JAILBROKEN then proceed to Step : 5


Step 1: Preparing for DFU MODE - If you haven't do so, plug your iphone to your compute .....
Step 2: Downgrading your 1.1.2 to 1.1.1 - On itunes, press and hold shift+restore (for windows) ....
Step 3: Jailbreaking and Activating 1.1.1 - On your iphone, slide to emergency then dial *#307# iphone will ring then delete *#307# ...
Step 4: PREPARING FOR UPGRADE TO 1.1.2 - Back to itunes, .....
Step 5: Preparing for the Unlock - You should have an activated jailbroken 1.1.2, open installer and install BSD Subsystem 2.0 .....
Step 6: Preparing for upgrade to 1.1.3 - Open installer Go to system folder and install OFFICIAL 1.1.3 soft upgrade and follow the prompt .....


Step 7:
CLEANING UP:

Ok, Now you have 1.1.3 unlock. Back to installer go to uninstall and UNINSTALL GeoHot Unlock (1.1.2, 1.1.3)

TROUBLESHOOTING:
SOUND: If there are no sound coming out from the speaker but your ringtone can make sound, Go TO SETTINGS-GENERAL-RESET- RESET ALL SETTINGS.

After your Iphone reboot, you will have your sound back

I think since your BB still on 04.02.13_G, your MAP GPS will not work. You will need to use the LOCATE ME or NAVIZON to get it to work.

Please correct me if I'm wrong.

iclarified.com or from poetic_folly's site? i forgot the source.