Overclocking 1.8Ghz t0 3.Ghz

[mejie]

---

how to lock the ram man bro? u mean nga dli ko mo hilabot sa cpu fsb and adto ko kuha sa cpu multiplier? sakto ba ko?

[poldopunk]

you've been overclocking your processor without paying much attention to the memory? anyway, if you have the option to select DDR2-800 sa imong BIOS for the memory frequency, select that option.

memory multiplier is the setting that will determine at what frequency your ram will operate.

[obor]

bro my memory multiplier has 3 options (2.66, 3.33 and 4.0) hows that? asa ko anang 1:1 ??

Para mahimong 1:1 bro, 2 ang setting sa System memory multiplier(SPD). And dont forget pud sa PCIE frequency, imo pud na i set sa fixed value na 100 para mas stable ang imo oc. Other settings, performance enhance - standard, system voltage - manual, CPU smart fan control- disabled. I set gyud tanan manually and walay auto para kabalo ka kung pila voltage gihatag sa imo mobo, just to be sure and to be safe.

Kung ma set na na nimo, maka overclock na ka ana ug taas-taas. Up the cpu host frequency by baby steps, tag 10 sa early part then 5 kung taas taas na ka ug oc. Kung di na ka boot, huwata lang ug 20sec kay automatic reload man na imo mobo to the last stable BIOS settings, then up ka gamay sa cpu Vcore. Highest nako na try sa v core 1.475.

[poldopunk]

post usa diri imong memory specs beh kay lisod kaayo gatag-an tag-an ra ko diri unsa dapat. tapos, post nalang sad imong maximum clockspeed nga gusto (kana sang possible sa imong proc ha).

[mejie]

@obor

kabalo namn ko ana bro.. ^^ ang ako lang nangita ko ug stable settings para sa 3 ghz.. ang setting nako ron naa sa 2.8ghz... inig adto na nako sa 2.9 ug 3.. mo crash na kung mo open ug games....


@poldopunk

mao ni ram nako bro

2 pcs kingston ddr2 800 @ 1ghz..... unsa pa lain gusto mahibaw an nimo bro bwt sa ram? gusto nako makapatong na sya ug 3 ghz unta... my mobo is gigabyte gag31m-s2l, fsb 1333, ram support 800

[poldopunk]

sa imong current nga settings with FSB 323 and memory multiplier 2.66, you are slightly overclocking your memory @ DDR2-859.

set it to auto if possible para detected through its SPD. again, i highly recommend to look for the option to set the ram and the pcie frequency at their respective rated speed (DDR2-800 for RAM, 100MHz for PCIe), then play with the cpu front side bus para sure ka kung mo fail, processor ra jud nakaingon and not these 2. read your motherboard manual para makabalo ka sa tanang setting sa imong BIOS, worry about 1:1 later. pangitaa sa ang maximum FSB na kaya sa imong processor.

there are many ways to get 3GHz on your processor. from your first post you have multiplier set at 9 x 323 = 2907 (2.9 MHz). another way is lower down cpu multiplier to 8, increase FSB to 380 and you get 3040 (3.0 GHz), kung di gani mo post, tagai gamay juice imong northbridge heatsink (+.05) increments until stable.

**EDIT**

DON'T GO BEYOND YOUR CHIPSET and PROCESSOR voltages kay goodbye proc/chipset jud.

[emoners]

@TS: even if you can achieve those clocks, are they STABLE?

[personalmgt]

ask alastor of bfwgaming. back on the overclocking competition he made 2ghz(e2180) into a whopping 3.2ghz using stock fans.

and he won the 12000 peso power supply. *drool*

[mE_bytes]

ask alastor of bfwgaming. back on the overclocking competition he made 2ghz(e2180) into a whopping 3.2ghz using stock fans.

and he won the 12000 peso power supply. *drool*

could this one possibly won? waaaaaaaaaaaa! nagmahay ko why I didn't join that said competition.. hehe!


ENLARGEMENT: http://farm4.static.flickr.com/3012/...dd306c93_b.jpg

[isyot_daut]

hmmmmmmmmmmmmmmmmmm...nice...